Clamps, safety clamps and ferrules enable assembly of fittings/couplings on industrial hoses to create hose assembly. Their appropriate choice and assembly is of key importance regarding safe usage of flexible hose assembly. While choosing the appropriate element such aspects as shape of a hose „tail”, hose material and wall thickness must be taken into consideration. In case of any doubts please contact Technical Department of Tubes International.
Strap assembly system completely eliminates the need to keep stock of clamps in different sizes. It also allows quick and easy assembly of any type of fitting/coupling practically to any hose diameter. Consists of buckles (from 1" to 3"), 30,5 m of stainless steel strap (width from 6,3 mm to 19 mm) and an assembly tool.
Before use strap assembly system remember to read the assembly instruction!
Clamps, designed to assemble fittings/couplings on hoses to create hose assemblies that are widely used in all branches of the industry. Our offer includes worm drive hose clams, worm drive hose clamps with bridge, band clamps with spring lock system maintaining constant tension, single or double band, single or double screw, etc. Available in carbon steel, galvanised steel, AISI 304, AISI 316 material versions.
Safety clamps designed to assemble fittings with a safety collar. Safety clamps RS-636..., RS-637... (DIN 2817) designed for standard fittings (smooth). Safety clamps RS-635... (DIN 2826) designed for high pressure and steam fittings (with serrated tail).
Available in AISI 316, brass (cast), aluminium (forged) material version. Working pressure 25 bar (DIN 2817) and to 100 bar (DIN 2826).
Robust, simple and safe two part hose clamps made of malleable iron. Designed to assemble claw couplings on hoses with internal diameter from 13 mm to 150 mm and working pressure to 25 bar.
Ferrules designed to assemble fittings/couplings on industrial hoses (rubber or PVC hoses with a textile braid or steel wire helix reinforcement). Made of zinc plated steel, stainless steel AISI 304 and AISI 316.
L type ferrules– designed to assemble fittings on hydraulic hoses. Available from 5/16” to 2 1/2”.
LDR, LD and LR type ferrules – designed to assemble hygienic couplings (NH type). Available from 1" to 4".
Internal swaging system allows to achieve full flow coupling system. The idea behind this system is pulling a hardened tool of larger diameter, down the inside of the stem in order to expand it to required diameter. The Main advantage of this system is a full flow of medium being transferred that results in cutting down reloading time and thus deriving economic benefits. Other advantages concerns lack of crevices (places e.g. between hose internal layer and end of hose tail, in which materials entrapment might occur). It is very important especially during transfer of granulates, grain, cement, concrete, etc. Also widely used for industrial rubber hoses with DN 50 - 300 (from 2" to 12") to transfer water, petrochemical substances, abrasive material, food substances, etc.