Monro Jet^® nozzles combine the high power of concentrated water jet with its wide beam, which makes cleaning or other surface processing fast and efficient.
The operating pressure of the nozzles ranges from 200 bar up to 2500 bar, for the flow rates from 2.84 l/minute up to 230.19 l/minute.
They can be used with guns, which are mounted on a rigid lance, as well as automated systems.

Advantages:

• increased efficiency compared to other solutions
• cost-effectiveness and efficiency
• ease of use and replacement of parts
• suitable for cleaning large surfaces
• available to all certified high pressure connections

Application:

• cleaning of concrete
• cleaning the hulls and containers of ships
• cleaning of runways
• removal of asphalt and tar
• cleaning of facades
• cleaning of painting chambers
• cleaning of steel castings
• and many other

Silicone hoses and connectors for cooling and heating systems in vehicles. Spiral hoses with an inside diameter up to 38 mm are extremely flexible, so you can use them interchangeably as silicone elbows. For oils, fuels and oil mist recommended version is fluoro silicone (flurocarbon).

Hoses meet SAE J20R1 (hoses with steel spiral - SAE J20R2).

Selection of the hose in contact with Sales Department of Tubes International.

Application:

• vehicle cooling systems (water, fluids)
• heating systems in vehicles (air)

Available:

• straight hoses and flexible hoses with steel spiral
• elbows 90°, 45°
• straight reducers and reducing elbows
• anti-vibration couplings
• aluminum connectors

Lightweight, very flexible hose designed to extract dust, polluted air and fumes. Widely used in industrial and home vacuum cleaners or as a protective hose.

Hose material:

• two layers of soft PVC reinforced with yarn

Reinforcement:

• PVC-coated steel wire helix

Working temperature:

• from -20°C to +70°C

Diameter range:

• from DN25 to DN63

Syntesi ensures full modularity and flexibility that Skillair units are recognized for. By using metal threaded connection and fixing brackets traditional assembling parts such as stay bolts or yokes are not needed. Thus the system is easier to assemble and more economical.

Material:

• plastic

Connection:

• 1/8", 1/4", 3/8"

Working temperature:

• from -20° to +50°C

Sealing:

• NBR

Working pressure:

• up to 15 bar

Application:

• filtration
• regulation
• lubrication

Internal swaging system allows to achieve full flow coupling system. The idea behind this system is pulling a hardened tool of larger diameter, down the inside of the stem in order to expand it to required diameter. The Main advantage of this system is a full flow of medium being transferred that results in cutting down reloading time and thus deriving economic benefits. Other advantages concerns lack of crevices (places e.g. between hose internal layer and end of hose tail, in which materials entrapment might occur). It is very important especially during transfer of granulates, grain, cement, concrete, etc. Also widely used for industrial rubber hoses with DN 50 - 300 (from 2" to 12") to transfer water, petrochemical substances, abrasive material, food substances, etc.

CEJN MULTIFLOW is a universal blowgun that effectively cleans surfaces with air, water and non-aggressive chemicals. User friendly by lightweight and ergonomic construction that ensures very flexible operation in cleaning, cooling or drying applications. Precise flow is achieved by adjustable flow settings. Nozzle adjusts from narrow jet to wide beam. The MultiFLOW meets and exceeds OSHA safety standards. Available with quick release coupling (plug) or female thread 1" BSP.

Working pressure:

• 16 bar / 10 bar

Working temperature:

• from -20°C to +60°C (16 bar) / to +80°C (10 bar)

Needle vales designed for high-pressure hydraulic and industrial applications. Please contact Tubes International Sale or Technical Department for usage with media other than hydraulic oil or high temperature applications.

Material:

• AISI 316L

Seal:

• PTFE (grafoil on requiest)

Working pressure:

• to 690 bar

Temperature range:

• PTFE seal: -73°C to +210°C
• Grafoil seal: -54° to +510°C