Standard methods used to assemble fittings on industrial rubber hoses

mocowane opaskami CLAMPED FITTINGS
Several types of clamps and bands that clamp a hose on a fitting tail.
mocowane obejmami z zamkiem FITTINGS WITH SAFETY CLAMPS
Bolted clamps that crimp a hose on a tail of the fitting and are secured with a lock(flange) against detaching from a tail of the fitting.
zaciskane tulejami z zewnątrzCRIMPED FITTINGS
Ferrules are mechanically crimped from outside and secured with a lock (flange) against detaching from a tail of the fitting.

Special methods used to assemble fittings on industrial rubber hoses

zaciskane od wewnątrz INTERNAL CRIMPED FITTINGS
Fittings are mechanically crimped from the inside (by pulling a conically-shaped tool through) and secured with a lock (flange) against detaching from a tail of the fitting. This method ensures full, uninterrupted flow of media through the fitting.
wbudowane (zawulkanizowane)BUILT-IN FITTINGS(VULCANISED)
Fittings are vulcanised into a hose during hose production process – integrated with the hose. This method ensures full, uninterrupted flow of media through the fitting.
wbudowane (zawulkanizowane) i pokryte gumą kołnierzeBUILT-IN (VULCANISED) RUBBER PROTECTED FLANGES
Fittings are vulcanised into a hose during hose production process – integrated with the hose, coated with rubber inside and on a sealing surface. This method ensures full,
uninterrupted flow of media through the fitting. No direct contact between media and fitting material. No additional seal needed.
kołnierze z wbudowanym pierścieniemFLANGES INTEGRATED WITH A RING
Fittings are assembled with a special shaped ring vulcanised during hose production process – integrated with the hose, coated with rubber inside and on a sealing surface.
This method ensures full, uninterrupted flow of media through the fitting. No direct contact between media and fitting material. No additional seal needed.
kołnierze gumoweRUBBER FLANGES
Flange-shaped, rubber fittings formed and vulcanised during hose production process, reinforced and bolted together with metal back-up rings during installation.

Special end types of industrial rubber hoses

miękkie końce węża SOFT HOSE ENDS
To facilitate fitting assembly, the wire helix of a suction-delivery hose is ended earlier, before the end of the hose (during hose production). The hose end is finished with textile braid and has appropriate wall thickness.
powiększone miękkie końce wężaENLARGED SOFT HOSE ENDS
To facilitate fitting assembly, the wire helix of a suction-delivery hose is ended earlier, before the end of the hose (during hose production). The hose end is enlarged, finished with textile braid and has appropriate wall thickness.
zawulkanizowane końce wężaCAPPED HOSE ENDS
The end of a hose is completely vulcanised during hose production process in order to protect reinforcement (braid) against medium intrusion or moisture.