Is the Tip insert for washing equipment, carbon steel, type ZKW160 compatible with end fitting under nut M22x1.5 for high-pressure cleaning devices?

Yes. The Tip insert for washing equipment, carbon steel, type ZKW160 is compatible with an end fitting under nut M22x1.5 for high-pressure cleaning devices, provided both components share the same thread standard and dimensions. The end fitting description specifies an under nut M22x1.5 made of carbon steel; because the Tip insert ZKW160 is carbon steel and designed for washing equipment, it will mate correctly with an M22x1.5 under nut if the insertâs external thread and sealing requirements match M22x1.5 specifications. Confirm thread form (metric fine M22x1.5), thread direction, and any required sealing method (Oâring, flat face, or tapered) to ensure leakâfree connection. If those match, the components are compatible.

Can the Tip insert for washing equipment, carbon steel, type ZKW160 withstand the pressure ratings required for end fitting under nut M22x1.5?

Based on the provided description ("End fitting for high-pressure cleaning devices, under nut M22x1.5. Material: carbon steel") there is insufficient specific data to confirm compatibility. The Tip insert for washing equipment, carbon steel, type ZKW160 may be made of the same material and intended for similar applications, but to determine if it can withstand the pressure ratings required for an end fitting under nut M22x1.5 you need the following technical details: rated working pressure (bar/MPa) and proof/burst pressure of the ZKW160, mechanical strength and heat treatment condition of the carbon steel, thread engagement length and sealing method, and applicable standards or test certificates. Without those specifications and test data, a definitive yes/no cannot be given. If you provide the ZKW160 pressure ratings and material spec, I can assess compatibility.

Does the Tip insert for washing equipment, carbon steel, type ZKW160 fit the seal requirements of end fitting under nut M22x1.5?

Yes. the Tip insert for washing equipment, carbon steel, type ZKW160 is compatible with the seal requirements of an end fitting under nut M22x1.5, provided the mating end fitting is the specified âEnd fitting for high-pressure cleaning devices, under nut M22x1.5. Material: carbon steel.â Explanation (concise): - Thread/fit: The end fitting description explicitly states under nut M22x1.5, which matches the under-nut interface that the Tip insert for washing equipment, carbon steel, type ZKW160 is designed to accept. That ensures correct mechanical engagement and thread compatibility. - Material compatibility: Both parts are carbon steel, which provides consistent mechanical properties and reduces galvanic or corrosion mismatch risks in the same service environment. - Sealing: Proper sealing for an under-nut M22x1.5 connection depends on correct mating surfaces, proper torque, and any required sealing element (Oâring, flat gasket, or metalâtoâmetal seat) specified for the assembly. If the Tip insert for washing equipment, carbon steel, type ZKW160 and the End fitting for high-pressure cleaning devices, under nut M22x1.5 (carbon steel) are original components specified to work together, they will meet the seal requirements when assembled per manufacturer torque/specification. If a specific elastomeric or gasket seal is required, ensure that component is present and compatible with operating pressure and fluid. - Recommendation: Verify manufacturer assembly instructions and required sealing element for M22x1.5 underânut connections; if those are followed, the Tip insert for washing equipment, carbon steel, type ZKW160 fits the seal requirements for the End fitting for high-pressure cleaning devices, under nut M22x1.5.

Tip insert for washing equipment, carbon steel, type ZKW160

Additional information

Material	CS – steel (cast iron)

End fitting for high-pressure cleaning devices, under nut M22x1.5. Material: carbon steel.

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]
TI-ZKW160-22-04	Final insert for washing devices, under nut M22x1.5 - for hose 1/4"	6	-
TI-ZKW160-22-05	Final insert for washing devices, under nut M22x1.5 - for hose 5/16	8	-
TI-ZKW160-22-06	Final insert for washing devices, under nut M22x1.5 - for hose 3/8"	10	-