Mini actuator pneumatic double-acting operation, without magnet, without cushioning ISO 6432 STD

Mini actuator double-acting operation ISO 6432 STD, type 110, without magnet, without cushioning. It has been designed to work with filtered air, oiled or non-oiled, and does not require additional maintenance operations. A stainless steel sleeve was used to make the actuator. The dimensions of the external covers of some diameters have been reduced, which allows mounting the actuators in difficult and confined spaces. The service life of actuators with NBR seals is 15 million cycles, with polyurethane ones 30 million cycles. The presented values should not be treated as binding or guaranteed, but only as a reference due to the variability of many factors, including loads radial and axial, speed, temperature, czy losses air (values limit). Piston diameter: Ø 8, 10, 12, 16, 20 and 25 mm. stroke working: od 5 for 500 mm. pressure working: od 0.8 up to 10 bar (Ø 8, 10, 12 mm); od 0.6 up to 10 bar (Ø 16, 20, 25 mm). Sealing: polyurethane, NBR, FKM/FPM. Operating temperature: from -10°C to +150°C depending on used seal.