STD and pneumatic soft-start valve, VAP 100 series SKILLAIR®, without end plates
Variant parameters
| Article number | MW-3271500A |
| Product variant name | Pneumatically controlled soft start valve VAP PN 100 (SKILLAIR) without end plates. |
| Nominal inner diameter | - |
| Working pressure [bar] | - |
Short description
Soft start valve, used for the safe introduction of air into the pneumatic system, protecting actuators from sudden pressure increases. STD valve: opens automatically when the outlet pressure reaches approximately 50% of the inlet pressure. Pneumatic control valve: without pilot pressure, air flows from the inlet connection to the outlet through a needle valve. Upon receiving an external control signal, pneumatic, the valve is overridden and air flows through the full cross-section of the valve. The valve does not vent the pneumatic system. Size: 100. Supply pressure: up to 15 bar. Operating temperature: up to +50°C. Flow: 2000 l/min (at an inlet pressure of 6 bar Δp = 1 bar).