The ULTRA CLEAN® device is designed to clean hoses, flexible assemblies and pipes for pressure hydraulics and for other industrial application. Cleaning is carried out by shooting cleaning projectiles through the hose using compressed air. Projectile strips out the internal contamination as it travels through the hose forcing contamination out of the pipe or hose assembly. ULTRA CLEAN® cleaning method allows to achieve ISO 13/10 cleanliness class of hydraulic oil.

A simple device designed to clean hoses and pipes with compressed air. Available with two plastic nozzles, one is for hoses with DN from 3/16” to 1” and the other for hoses with DN from 1” to 2”. When the hose is pressed against the nozzle the valve opens and makes cleaning possible.

• air pressure: min. 6 bar,
• connection to pneumatic installation: 1/2” BSP

Although very effective – compressed air blowing does not meet any above mentioned standards (ISO 4406 nor NAS 1638).

Cleaning machine with special solvent solution under pressure. Designed to clean hoses and hose assemblies after cutting, skiving or crimping.
Cleaning is carried out by means of a spray gun that introduces a specific solvent into the hose. The detergent action of the solvent is combined with the pressure (max 6 bar) that develops inside the component to eliminate any deposits possibly accumulated therein and well as and to protect against corrosion (in a limited time frame). Enables cleaning of small or big bore hoses.
Speedy clean allows to achieve ISO 4406 16/13 and NAS 1638:8 cleanliness class of hydraulic oil.