Be smart – choose smart!

Choose SMARTFLEX abrasion resistant ducting hoses. With their special 4 in 1 combination of properties, the hoses are intended for woodworking and furniture industries.

Smartflex ducting hoses
Trudnopalne

Flame retardant (according to DIN 4102 B1)

DIN 4102 standard classifies products according to their reaction to fire (flammability). All SMARTFLEX ducting hoses are flame retardant, according to the standard above, class B1. In practice it means, that the material of the hoses will not support fire, and the hose itself meets the stringent woodworking industry requirements. Therefore, we recommend using SMARTFLEX hoses to transfer wood shavings, sawdust, wood dust and bigger wood chips.

Węże antystatyczne

Antistatic (R<109Ω)

When loose materials (such as: wood dust, shavings, sawdust) are conveyed, then electrostatic charges may build up. For safety reasons it is recommended to use hoses made of antistatic polyurethane. The material of SMARTFLEX hoses has surface resistance of R<109 Ω, so it dissipates electrostatic charges and effectively prevents a potential ignition source from forming. To eliminate that risk completely, both ends of the wire helix should be always grounded.

Węże odporne na mikroby

Resistant to microbes

Materials usually used to make polyurethane hoses may be exposed to a destructive microbiological action. Some environments (high humidity, sun exposure or elevated temperature, transport of organic substances etc.) increase the chance of microbial growth. Very often, these microbes have a destructive impact on the construction and properties of the hose, thus using the products resistant to the above process – such as SMARTFLEX hoses is highly recommended.

Węże odporne na hydrolizę

Resistant to hydrolysis

High air humidity in the facilities where hoses operate may also cause problems (e.g. many companies use air humidification systems on the factory floor so the humidity is pretty high there). These conditions drastically affect the mechanical properties of hose material – hydrolysis irreversibly destroys the structure of polyurethane and shortens hose service life. SMARTFLEX hoses are resistant to hydrolysis, so they work perfectly in such applications.

Węże odporne na hydrolizę

Hoses compliant with TRGS 727 standard and ATEX Directive 2014/34/EU:

Pneumatic transfer of combustible dusts and bulk loose materials (zone 20, 21, 22 indoor); suction of combustible dusts (zone 22 indoor); transfer of flammable gases, fluids and their vapours (zone 0, 1, 2 indoor); transfer of non-flammable gases, fluids and their vapours (zone 0, 1, 2 indoor).

Application

Extraction of wood dust, sawdust, shavings
CNC wood processing machines

Smartflex ducting hoses

Extraction of light loose materials SMARTFLEX 04

Wąż do odciągu lekkich materiałów sypkich SMARTFLEX 04
Wąż do odciągu lekkich materiałów sypkich SMARTFLEX 04Wąż do odciągu lekkich materiałów sypkich SMARTFLEX 04Wąż do odciągu lekkich materiałów sypkich SMARTFLEX 04Wąż do odciągu lekkich materiałów sypkich SMARTFLEX 04Wąż do odciągu lekkich materiałów sypkich SMARTFLEX 04
  • Hose material: Transparent polyether-polyurethane
  • Wall thickness: 0,4 mm
  • Reinforcement: Steel wire helix
  • Work. temp.: From -40°C up to +100°C
  • Diameter range: 20 mm ÷ 800 mm

Extraction of dust and particles SMARTFLEX 06

Wąż do odciągu pyłu i kurzu SMARTFLEX 06
Wąż do odciągu lekkich materiałów sypkich SMARTFLEX 04Wąż do odciągu lekkich materiałów sypkich SMARTFLEX 04Wąż do odciągu lekkich materiałów sypkich SMARTFLEX 04Wąż do odciągu lekkich materiałów sypkich SMARTFLEX 04Wąż do odciągu lekkich materiałów sypkich SMARTFLEX 04
  • Hose material: Transparent polyether-polyurethane
  • Wall thickness: 0,6 mm
    (0,5 mm to Ø 60 mm)

  • Reinforcement: Steel wire helix
  • Work. temp.: From -40°C up to +100°C
  • Diameter range: 20 ÷ 500 mm

Extraction of sawdust and wood shavings SMARTFLEX 07

Wąż do odciągu trocin i wiórów SMARTFLEX 07
Wąż do odciągu lekkich materiałów sypkich SMARTFLEX 04Wąż do odciągu lekkich materiałów sypkich SMARTFLEX 04Wąż do odciągu lekkich materiałów sypkich SMARTFLEX 04Wąż do odciągu lekkich materiałów sypkich SMARTFLEX 04Wąż do odciągu lekkich materiałów sypkich SMARTFLEX 04
  • Hose material: Transparent polyether-polyurethane
  • Wall thickness: 0,7 mm

  • Reinforcement: Steel wire helix
  • Work. temp.: From -40°C up to +100°C

  • Diameter range: 20 ÷ 500 mm

Extraction of wood chips SMARTFLEX 10

Wąż do odciągu skrawków drewna SMARTFLEX 10
Wąż do odciągu lekkich materiałów sypkich SMARTFLEX 04Wąż do odciągu lekkich materiałów sypkich SMARTFLEX 04Wąż do odciągu lekkich materiałów sypkich SMARTFLEX 04Wąż do odciągu lekkich materiałów sypkich SMARTFLEX 04Wąż do odciągu lekkich materiałów sypkich SMARTFLEX 04
  • Hose material: Transparent polyether-polyurethane
  • Wall thickness: 1,0 mm

  • Reinforcement: Steel wire helix
  • Work. temp.: From -40°C up to +100°C

  • Diameter range: 25 ÷ 500 mm

Extraction of abrasive materials SMARTFLEX 14

Wąż do odciągu materiałów ściernych SMARTFLEX 14
Wąż do odciągu lekkich materiałów sypkich SMARTFLEX 04Trudnopalny wąż odciagowyWąż do odciągu lekkich materiałów sypkich SMARTFLEX 04Wąż do odciągu lekkich materiałów sypkich SMARTFLEX 04Wąż do odciągu lekkich materiałów sypkich SMARTFLEX 04
  • Hose material: Transparent polyether-polyurethane
  • Wall thickness: 1,4 mm

  • Reinforcement: Steel wire helix
  • Work. temp.: From -40°C up to +100°C

  • Diameter range: 25 ÷ 450 mm
Be smart – choose smart! Choose SMARTFLEX hoses!

Contact us and tell us what type of SMARTFLEX hose you need. Otherwise, briefly describe your needs, and we will help you choose SMARTFLEX hose that matches Your Business best.

  • This field is for validation purposes and should be left unchanged.