Is the BSPT male threaded hose end, brass, NiTO type B rated for continuous service at 25 bar and temperatures up to +80Â°C?

Yes. The BSPT male threaded hose end, brass, NiTO type B is rated for continuous service at a working pressure of 25 bar and operating temperatures up to +80Â°C according to the provided description. The material is brass and the specified ratings list a working pressure of 25 bar and an operating temperature limit of +80Â°C, which indicates suitability for continuous use within those limits.

Can BSPT male threaded hose end, brass, NiTO type B be used with fluids at +80Â°C and transient spikes above 25 bar?

No - BSPT male threaded hose end, brass, NiTO type B is rated for a working pressure of 25 bar at operating temperatures up to +80Â°C. Continuous use at +80Â°C is acceptable, but transient spikes above 25 bar exceed its specified working pressure and are not supported by the given data. Using it with overpressure spikes risks seal or body failure, leaks or bursting. For safe operation with transient pressures >25 bar, select a fitting with a higher certified pressure rating or consult the manufacturer for verified transient/peak pressure limits and material/temperature derating.

What sealing methods are recommended for BSPT male threaded hose end, brass, NiTO type B to ensure leak-free joints?

For BSPT male threaded hose end, brass, NiTO type B, recommended sealing methods to ensure leak-free joints: 1. PTFE tape (thread seal tape) - Use goodâquality PTFE tape rated for hydraulic/air use. - Wrap 3â5 turns clockwise (looking at end of male thread) so tape does not unwind during assembly. - Start one or two threads back from the end to avoid tape entering the hose or fitting bore. - Apply moderate tension; avoid bulky buildâup that prevents metalâtoâmetal engagement. - Tighten to recommended torque for brass BSPT threads; do not overâtighten to prevent thread damage. 2. Liquid thread sealant (anaerobic or pipe sealant) - Use a thread sealant compatible with brass, operating temperatures up to +80Â°C, and working pressure 25 bar (e.g., anaerobic sealants or PTFEâfilled pipe dope designed for hydraulic/air). - Clean threads of oil/contaminants, apply sealant evenly on male threads, allow curing time if required. - Provides reliable seal and vibration resistance; follow manufacturerâs cure/torque guidelines. 3. Combination of sealant + PTFE tape - For extra insurance, apply a thin layer of suitable pipe thread compound then wrap PTFE tape; or use PTFE tape then apply light coat of compatible liquid sealant. - Ensures both initial sealing and longâterm leak resistance. 4. Do NOT use: relying solely on thread friction without any sealant is not recommended for BSPT (tapered) threads; avoid excessive sealants that can contaminate system or block passages. 5. Assembly best practices - Inspect threads for damage; ensure clean, dry surfaces. - Handâstart threads to avoid crossâthreading. - Use correct spanners and apply controlled torque; brass is softerâavoid overtightening. - After assembly, test at working pressure and perform leak check. Choose PTFE tape or a compatible pipe thread sealant designed for brass and specified temperature/pressure; both methods are standard and effective for BSPT male threaded hose end, brass, NiTO type B.

BSPT male threaded hose end, brass, NiTO type B

All products, Low-pressure fittings and adapters/

Additional information

Material	B – brass (bronze)

Brass hose end, NiTO type B with external BSPT thread. Material: brass. Working pressure: 25 bar. Operating temperature: up to +80°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
NT-2660AA4	Type B GZ BSPT 1/8" hose fitting 1/8", brass	3	25	In stock	Enquiry
NT-2660BA4	Type B GZ BSPT 1/4" end fitting for 1/4" hose, brass	6	25	In stock	Enquiry
NT-2660CA4	Type B GZ BSPT 3/8" hose fitting 3/8", brass	10	25	In stock	Enquiry
NT-2660DA4	Type B GZ BSPT 1/2" hose fitting 1/2", brass	12	25	In stock	Enquiry
NT-2660EA4	Type B GZ BSPT 3/4" hose fitting 3/4", brass	20	25	In stock	Enquiry
NT-2660FA4	Type B GZ BSPT 1" end for 1" hose, brass	25	25	In stock	Enquiry
NT-2664AA4	Type B GZ BSPT 1/8" hose fitting 1/4", brass	6	25	In stock	Enquiry
NT-2664BA4	Type B GZ BSPT 1/4" end for 3/8" hose, brass	10	25	In stock	Enquiry
NT-2664CA4	Type B GZ BSPT 3/8" hose fitting 1/4", brass	6	25	In stock	Enquiry
NT-2664DA4	Type B GZ BSPT 1/2" hose fitting 1/4", brass	6	25	In stock	Enquiry
NT-2664EA4	Type B GZ BSPT 3/8" end fitting for 3/4" hose, brass	20	25	In stock	Enquiry
NT-2664NA4	Type B GZ BSPT 1/2" hose fitting 5/8", brass	16	25	In stock	Enquiry
NT-2666AA4	Type B GZ BSPT 1/8" hose fitting 3/8", brass	10	25	In stock	Enquiry
NT-2666BA4	Type B GZ BSPT 1/4" end fitting for 1/2" hose, brass	12	25	In stock	Enquiry
NT-2666CA4	Type B GZ BSPT 3/8" hose fitting 1/2", brass	12	25	In stock	Enquiry
NT-2666DA4	Type B GZ BSPT 1/2" hose fitting 3/8", brass	10	25	In stock	Enquiry
NT-2666EA4	Type B GZ BSPT 3/4" hose fitting 1/2", brass	12	25	In stock	Enquiry
NT-2666NA4	Type B GZ BSPT 1/2" hose fitting 3/4", brass	20	25	In stock	Enquiry
NT-2668BA4	Type B GZ BSPT 1/4" end fitting for 5/16" hose, brass	8	25	In stock	Enquiry
NT-2668DA4	Type B GZ BSPT 1/2" end for 5/16" hose, brass	8	25	In stock	Enquiry