Is the Reducing adapter from GZ/GW BSP, brass, type 3450 suitable for hot and cold water systems at -10Â°C to +100Â°C and 10 bar pressure?

Yes. The Reducing adapter from GZ / GW BSP, brass, type 3450 is specified for use in piping connections including hot and cold water installations. Its material (brass), operating temperature range (â10Â°C to +100Â°C) and rated working pressure (10 bar) match the conditions you stated, so it is suitable for use in such systems provided installation follows applicable standards and compatibility with other system materials is confirmed.

Can the Reducing adapter from GZ / GW BSP, brass, type 3450 be used for potable water piping in domestic hot and cold installations?

Yes. The Reducing adapter from GZ / GW BSP, brass, type 3450 is described for use in hot and cold water installations, made of brass, rated for temperatures -10Â°C to +100Â°C and working pressure up to 10 bar-parameters suitable for typical domestic potable hot and cold water systems. However, final suitability for potable (drinking) water depends on local regulations and potable-water approvals (e.g., NSF/WRAS/ACS) and any specific dezincification resistance or lead-content limits; if certification for potable water is required, verify the manufacturerâs compliance documentation before installation.

Does the Reducing adapter from GZ / GW BSP, brass, type 3450 meet plumbing codes for domestic water installations?

Reducing adapter from GZ / GW BSP, brass, type 3450 may be suitable for many domestic water installations, but whether it âmeets plumbing codesâ depends on specific local regulations and additional product certifications beyond the basic technical data provided. From the description: - Material: brass. commonly accepted for potable water fittings, but compliance may require dezincification-resistant brass (DZR) or specific alloy designation in some jurisdictions. - Threads: external and internal BSP. BSP is a standard thread form used widely in plumbing; acceptability depends on local code requirements (some regions prefer BSP, others NPT or metric). - Operating temperature: -10Â°C to +100Â°C. suitable for typical hot and cold domestic water systems. - Working pressure: 10 bar. generally acceptable for residential water pressures (often well below this limit). What you need to confirm compliance: 1. Material certification: proof of DZR or approved brass alloy for potable water where required (e.g., WRAS in UK, ACS in France, NSF/ANSI 61 in US). 2. Thread/standard certification: confirmation BSP thread standard is acceptable for the installation and that thread tolerances meet relevant norms (e.g., ISO or EN standards). 3. Product approvals: evidence of applicable plumbing approvals or markings required by local code (e.g., CE marking with harmonized standard reference in EU, local potable-water certification). 4. Installation context: some codes restrict use of threaded brass fittings in concealed or buried installations or require additional backflow prevention. Conclusion: Technically the Reducing adapter from GZ / GW BSP, brass, type 3450 has temperature and pressure ratings suitable for domestic hot and cold water, but you must verify material alloy (DZR if required), applicable certifications/approvals, and local code acceptance of BSP threaded brass fittings before assuming full code compliance.

Reducing adapter from GZ / GW BSP, brass, type 3450

Additional information

Material	B – brass (bronze)

Reducing adapter with external and internal BSP thread for use in piping connections, e.g., hot and cold water installations. Material: brass. Operating temperature: from -10°C to +100°C. Working pressure: 10 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
RV-3450-04-02	Reducing adapter with G 1/4" BSP / G 1/8" BSP, brass	-	10	In stock	Enquiry
RV-3450-06-02	Reducing adapter with GZ 3/8" BSP / GW 1/8" BSP, brass	-	10	In stock	Enquiry
RV-3450-06-04	Reducing adapter with GZ 3/8" BSP / GW 1/4" BSP, brass	-	10	In stock	Enquiry
RV-3450-08-04	Reducing adapter with G 1/2" BSP / G 1/4" BSP, brass	-	10	In stock	Enquiry
RV-3450-08-06	Reducing adapter with G 1/2" BSP / G 3/8" BSP, brass	-	10	In stock	Enquiry
RV-3450-12-04	Reducing adapter with G 3/4" BSP / G 1/4" BSP, brass	-	10	In stock	Enquiry
RV-3450-12-06	Reducing adapter with GZ 3/4" BSP / GW 3/8" BSP, brass	-	10	In stock	Enquiry
RV-3450-12-08	Reducing adapter with GZ 3/4" BSP / GW 1/2" BSP, brass	-	10	In stock	Enquiry
RV-3450-16-06	Reduction adapter with GZ 1" BSP / GW 3/8" BSP, brass	-	10	In stock	Enquiry
RV-3450-16-08	Reducing adapter with G 1" BSP / G 1/2" BSP, brass	-	10	In stock	Enquiry
RV-3450-16-12	Reducing adapter with G 1" BSP / G 3/4" BSP, brass	-	10	In stock	Enquiry
RV-3450-20-12	Reducing adapter with GZ 1.1/4" BSP / GW 3/4" BSP, brass	-	10	In stock	Enquiry
RV-3450-20-16	Reducing adapter with GZ 1.1/4" BSP / GW 1" BSP, brass	-	10	In stock	Enquiry
RV-3450-24-12	Reducing adapter with GZ 1.1/2" BSP / GW 3/4" BSP, brass	-	10	In stock	Enquiry
RV-3450-24-16	Reducing adapter with GZ 1.1/2" BSP / GW 1" BSP, brass	-	10	In stock	Enquiry
RV-3450-24-20	Reducing adapter with G 1.1/2" BSP / G 1.1/4" BSP, brass	-	10	In stock	Enquiry
RV-3450-32-20	Reduction adapter with GZ 2" BSP / GW 1.1/4" BSP, brass	-	10	In stock	Enquiry
RV-3450-32-24	Reduction adapter with GZ 2" BSP / GW 1.1/2" BSP, brass	-	10	In stock	Enquiry
RV-3450-40-32	Reduction adapter with GZ 2.1/2" BSP / GW 2" BSP, brass	-	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Reducing adapter with external and internal BSP thread for use in piping connections, e.g., hot and cold water installations. Material: brass. Operating temperature: from -10°C to +100°C. Working pressure: 10 bar.