Is the Universal rubber hose perfect for VARIFLEXâ¢ 300 retractors suitable for both hot water and hydraulic fluids, and what is its operating temperature range?

Yes. The Universal rubber hose perfect for VARIFLEXâ¢ 300 retractors is suitable for both hot water and hydraulic fluids. Its rated operating temperature range is â29Â°C to +88Â°C.

Can the Universal rubber hose perfect for VARIFLEXâ¢ 300 retractors resist kinking and twisting during heavy-duty reel use?

Yes. The Universal rubber hose perfect for VARIFLEXâ¢ 300 retractors is specifically engineered to resist kinking and twisting during heavy-duty reel use. Its strong, flexible construction with synthetic braid reinforcement and low elongation makes it particularly recommended for drum reels. The ChemivicÂ® outer layer is abrasion-, oil- and weather-resistant, and the hose maintains integrity from -29Â°C to +88Â°C at a working pressure of 21 bar. Non-soiling, non-conductive, and suitable for air, water, oils and light chemicals, it reliably withstands the stresses of heavy-duty reeling without kinking or twisting.

Does the Universal rubber hose perfect for VARIFLEXâ¢ 300 retractors meet electrical safety requirements given its non-conductive rating?

Universal rubber hose perfect for VARIFLEXâ¢ 300 retractors is specified as non-conductive with a resistance R > 1 MÎ© per inch of hose length at 1000 V DC. This means the hose provides significant electrical insulation under the given test conditions, reducing the risk of electrical continuity along the hose surface. However, whether this meets electrical safety requirements depends on the specific standard, application and regulatory limits: - Many electrical safety standards define minimum insulation or leakage thresholds; R > 1 MÎ©/inch may be sufficient for preventing stray leakage in low-voltage pneumatic/hydraulic setups, but may not satisfy stricter IEC/EN, NFPA or workplace rules that require higher insulation, grounded/antistatic hoses, or specific surface resistivity ranges. - For environments with explosive atmospheres, electrostatic discharge (ESD) risk, or where conductive grounding is required, a non-conductive hose is contraindicated; such applications typically require antistatic/conductive hoses with specified surface resistivity and definite grounding instructions. - For routine industrial use where the primary concern is preventing current flow along the hose at typical operating voltages, the stated R > 1 MÎ©/inch at 1000 V DC indicates good insulating behavior, but confirmation against the exact applicable standard (e.g., company safety policy, regional electrical codes, or equipment manufacturer requirements) is necessary. Recommendation: Verify the required electrical safety criteria for your specific installation (standards, ESD/explosion classification, grounding requirements). If standards demand conductive/antistatic hoses or a lower surface resistance, choose a hose certified for that purpose. If the requirement is simply that the hose be non-conductive and the R > 1 MÎ©/inch test is acceptable, Universal rubber hose perfect for VARIFLEXâ¢ 300 retractors should meet that need.

Universal rubber hose perfect for VARIFLEX™ 300 retractors

All products, General purpose hoses/

Additional information

Material	NBR – nitrile rubber
Maximum operating temperature [°C]	88
Minimum operating temperature [°C]	-29
Vacuum resistance	no
Standard length [m]	137.1, 152.4, 30
Reinforcement	synthetic braid

High-quality universal hose designed for air, cold and hot water, oil, hydraulic fluids, light chemicals, diluted acids, cleaning fluids. Strong and flexible, resistant to twisting and kinking. Non-soiling outer layer, weather-resistant, abrasion-resistant, and oil-resistant. Due to its high durability and low elongation, it is particularly recommended for drum reels. The hose is non-conductive (R > 1 MΩ per inch of hose length at 1000 V DC). Inner layer: black NBR rubber. Reinforcement: synthetic braid. Outer layer: blue (red for diameter 15.9 mm) Chemivic® rubber blend (NBR/PVC). Working pressure: 21 bar. Operating temperature: from -29°C to +88°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
GY-VARIFLEX300-06BL	VARIFLEX300 hose (Wingfoot) 1/4", blue	6	21	In stock	Enquiry
GY-VARIFLEX300-08BL	VARIFLEX300 hose (Wingfoot) 5/16", blue	8	21	In stock	Enquiry
GY-VARIFLEX300-10BL	VARIFLEX300 hose (Wingfoot) 3/8", blue	10	21	In stock	Enquiry
GY-VARIFLEX300-13BL	VARIFLEX300 hose (Wingfoot) 1/2", blue	12	21	In stock	Enquiry
GY-VARIFLEX300-16R	VARIFLEX300 hose (Wingfoot) 5/8", red	16	21	In stock	Enquiry
GY-VARIFLEX300-19BL	VARIFLEX300 hose (Wingfoot) 3/4", blue	20	21	In stock	Enquiry
GY-VARIFLEX300-25BL	VARIFLEX300 hose (Wingfoot) 1", blue	25	21	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

High-quality universal hose designed for air, cold and hot water, oil, hydraulic fluids, light chemicals, diluted acids, cleaning fluids. Strong and flexible, resistant to twisting and kinking. Non-soiling outer layer, weather-resistant, abrasion-resistant, and oil-resistant. Due to its high durability and low elongation, it is particularly recommended for drum reels. The hose is non-conductive (R > 1 MΩ per inch of hose length at 1000 V DC). Inner layer: black NBR rubber. Reinforcement: synthetic braid. Outer layer: blue (red for diameter 15.9 mm) Chemivic® rubber blend (NBR/PVC). Working pressure: 21 bar. Operating temperature: from -29°C to +88°C.

Additional information

Material	NBR – nitrile rubber
Maximum operating temperature [°C]	88
Minimum operating temperature [°C]	-29
Vacuum resistance	no
Standard length [m]	137.1, 152.4, 30
Reinforcement	synthetic braid