Are Band-ItÂ® Giant tape fasteners in AISI 201 steel suitable for heavy-duty hose clamps over 150 mm and do the "noses" reliably secure the strap end after bending?

Yes. Band-ItÂ® Giant tape fasteners made from AISI 201 steel are designed specifically for heavy-duty hose clamps used on large-diameter hoses (over 150 mm). Their construction and material provide adequate strength and corrosion resistance for many industrial applications where large clamps are required. The clamps incorporate molded "noses" that mechanically capture and retain the strap end after it is bent; when properly installed these noses reliably prevent the strap from slipping back, maintaining clamping tension and assembly integrity. For the most demanding or corrosive environments, verify that AISI 201 meets your corrosion resistance and mechanical-strength requirements compared with alternatives (e.g., AISI 304/316) and confirm correct installation torque and strap width for optimal performance.

Do Band-ItÂ® Giant tape fasteners in AISI 201 steel resist corrosion and maintain grip on heavy-duty hose clamps over 150 mm?

Yes. Band-ItÂ® Giant tape fasteners in AISI 201 steel are designed for heavy-duty hose clamps over 150 mm. Their construction with ânosesâ secures the strap end after bending, providing reliable mechanical grip on large-diameter hoses. AISI 201 steel offers good general corrosion resistance for many applications, so the fasteners will maintain grip and function under typical conditions. However, AISI 201 is less corrosion-resistant than higher-grade stainless steels (e.g., 304/316), so in highly corrosive environments (marine, chemical exposure, prolonged moisture) corrosion resistance and long-term integrity may be reduced; for those conditions consider higher-grade stainless options.

Are Band-ItÂ® Giant tape fasteners in AISI 201 steel compatible with large-diameter hose clamps over 150 mm?

Yes. Band-ItÂ® Giant tape fasteners in AISI 201 steel are compatible with large-diameter hose clamps over 150 mm. The Giant system is specifically described as heavy-duty for hoses with large diameters (over 150 mm), and the fasteners feature the ânosesâ that secure the strap end after bendingâmaking them suitable for the larger clamps. AISI 201 steel provides appropriate strength and corrosion resistance for such heavy-duty applications, so Band-ItÂ® Giant tape fasteners in AISI 201 steel can be used with large-diameter hose clamps above 150 mm.

Buckles for tape Band-It® Giant, steel AISI 201

All products, Band clamping system/

Additional information

Buckles for the system band Band-It® Giant. Buckles for heavy applications (for hoses o large diameter – above 150 mm). Buckles with so-called “noses” secure the end of the band after bending. Material: steel AISI 201.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
BD-G44099	A buckle for band GIANT 3/4", AISI 201	-	-	In stock	Enquiry
BD-G44199	A buckle for band GIANT 1", AISI 201	-	-	In stock	Enquiry
BD-G44299	A buckle for band GIANT 1.1/4", AISI 201	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Buckles for the system band Band-It® Giant. Buckles for heavy applications (for hoses o large diameter – above 150 mm). Buckles with so-called “noses” secure the end of the band after bending. Material: steel AISI 201.