Is the Quick connector plug for injection molds with GZ and valve, DYROS series 40 compatible with both cooling liquids and compressed air at 15 bar?

Yes. The Quick connector plug for injection molds with GZ and valve, DYROS series 40 is specified for use with cooling liquids in plastic processing and with compressed air installations, and its working pressure is rated at 15 bar. Construction details support both media: brass body for general technical use and a Viton valve seal compatible with many cooling fluids and compressed air. Therefore it is compatible with both cooling liquids and compressed air at up to 15 bar.

Can the Quick connector plug for injection molds with GZ and valve, DYROS series 40 be used with gas cylinders and other gases at 15 bar?

Yes. The Quick connector plug for injection molds with GZ and valve, DYROS series 40 is specified for use in cooling liquids, compressed air installations, gas cylinder applications and other technical fields, with a working pressure of 15 bar. Its brass construction and Viton valve sealing are compatible with many gases. Before using with a specific gas, verify chemical compatibility of brass and Viton with that gas, confirm temperature limits, and ensure any applicable safety/regulatory requirements for gas cylinder service are met.

Does the Quick connector plug for injection molds with GZ and valve, DYROS series 40 use Viton sealing suitable for aggressive coolants?

Yes. The Quick connector plug for injection molds with GZ and valve, DYROS series 40 uses Viton valve sealing. Viton (FKM) is a fluoroelastomer with excellent chemical resistance to many aggressive coolants, oils, fuels and solvents, and it maintains performance over a wide temperature range. For most aggressive coolant formulations Viton provides superior compatibility compared with standard nitrile seals. However, compatibility depends on the specific coolant composition and operating temperature/pressure. The DYROS series 40 valve sealing is rated for working pressure up to 15 bar; if your coolant contains strong acids, ketones, certain amines, or other highly aggressive chemicals, or if operating temperatures exceed Vitonâs limits, verify compatibility with the coolant manufacturer or perform a chemical compatibility check before use.

Quick connector plug for injection molds with GZ and valve, DYROS series 40

Additional information

Material	B – brass (bronze)

DYROS series 40 quick coupling plug with external BSP thread and valve. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinder applications, and other technical fields. Material: brass. Valve sealing: viton. Working pressure: 15 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
DY-N412-V	DN 9 plug with GZ 1/2", with valve	-	15	In stock	Enquiry
DY-N414-V	DN 9 plug with GZ 1/4", with valve	-	15	In stock	Enquiry
DY-N438-V	DN 9 plug with GZ 3/8", with valve	-	15	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

DYROS series 40 quick coupling plug with external BSP thread and valve. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinder applications, and other technical fields. Material: brass. Valve sealing: viton. Working pressure: 15 bar.