90° quick-connection plug for injection molds with end under the clamping ring without valve, DYROS series 6

Q: Is the 90Â° quick-connection plug for injection molds with end under the clamping ring without valve, DYROS series 6 compatible with standard 15 bar cooling systems?

Yes. The 90Â° quick-connection plug for injection molds with end under the clamping ring without valve, DYROS series 6 is specified for cooling liquids and has a working pressure of 15 bar, so it is compatible with standard 15 bar cooling systems. The brass construction and intended use for mold cooling in plastic processing confirm suitability for such applications. Ensure that mating couplings and system fittings match the DYROS series 6 dimensions and that any system pressure spikes do not exceed the 15 bar rating.

Q: Can the 90Â° quick-connection plug for injection molds with end under the clamping ring without valve, DYROS series 6 be used with gases like nitrogen?

Yes. The 90Â° quick-connection plug for injection molds with end under the clamping ring without valve, DYROS series 6 can be used with gases such as nitrogen, provided its specifications are respected. It is designed for cooling liquids, compressed air installations and gas cylinders, is made of brass and has a working pressure of 15 bar. Ensure the application pressure does not exceed 15 bar, verify compatibility of brass with your specific gas and operating temperature, and confirm sealing and hose fittings are rated for gaseous service to prevent leaks.

Q: Can the 90Â° quick-connection plug for injection molds with end under the clamping ring without valve, DYROS series 6 be used in high-temperature mold cooling applications?

Yes. with reservations. The 90Â° quick-connection plug for injection molds with end under the clamping ring without valve, DYROS series 6 is designed primarily for cooling liquids in plastic-processing molds and works at a maximum working pressure of 15 bar. Its brass construction offers good thermal conductivity and corrosion resistance for many coolant fluids, making it suitable for common mold-cooling tasks. However, suitability for high-temperature mold cooling depends on the actual temperature range: - Brass has a steady performance up to roughly 200â300 Â°C in short exposures, but long-term use, gasket/seal degradation, and safety margins typically limit practical continuous service to much lower temperatures (often below ~120â150 Â°C) depending on seal materials used in the coupling assembly. - The product description does not specify maximum operating temperature or the seal/material temperature ratings. Without explicit temperature limits from the manufacturer, you risk accelerated seal failure, leakage, or reduced life at elevated temperatures. - For high-temperature cooling fluids (steam or hot oil), verify compatibility of internal seals, O-rings and any mating components, and confirm the manufacturerâs maximum temperature rating. Recommendation: If your âhigh-temperatureâ application is moderate (e.g., coolant up to ~100â120 Â°C) the 90Â° quick-connection plug for injection molds with end under the clamping ring without valve, DYROS series 6 may be acceptable. For temperatures above that, obtain the manufacturerâs maximum temperature specification or choose a coupling explicitly rated for high-temperature service.

90° quick-connection plug for injection molds with end under the clamping ring without valve, DYROS series 6

Additional information

Material	B – brass (bronze)

90° quick coupling plug DYROS series 6 with a ring locking end without a valve. Designed for cooling liquids for molds in plastic processing, compressed air installations, gas cylinders, and other technical fields. Material: brass. Working pressure: 15 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
DY-VN614-K8	90° plug DN 6 with end for locking ring 8 mm, without valve	-	15	In stock	0 zł		Enquiry
DY-VN638-K10	90° plug DN 6 with end for locking ring 10 mm, without valve	-	15	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

90° quick coupling plug DYROS series 6 with a ring locking end without a valve. Designed for cooling liquids for molds in plastic processing, compressed air installations, gas cylinders, and other technical fields. Material: brass. Working pressure: 15 bar.