Is the Quick coupling socket for injection molds with GZ without valve, DYROS series 6 compatible with both metric and BSP threads?

Yes. The Quick coupling socket for injection molds with GZ without valve, DYROS series 6 is available with either metric or BSP external threads, so it is compatible with both metric and BSP threaded connections. Designed for cooling liquids, compressed air and other technical applications, it is brass with stainless steel retaining rings/springs/balls, Viton sealing, and rated to 15 bar.

Does the Quick coupling socket for injection molds with GZ without valve, DYROS series 6 require special maintenance due to Viton seals?

Quick coupling socket for injection molds with GZ without valve, DYROS series 6 does not require special maintenance solely because it uses Viton seals. Viton (FKM) is a durable, chemical- and heat-resistant elastomer well suited for cooling liquids and compressed air up to the specified 15 bar. Standard maintenance practices apply: regular inspection for wear, cuts or hardening; periodic leak checks; clean mating surfaces and flush system if contaminated; replace seals if deterioration is observed. Avoid exposing Viton to incompatible chemicals (strong amines, ketones in prolonged contact) or temperatures beyond the sealâs rated range. Follow your normal maintenance intervals and replace Viton seals when performance degrades.

Can Quick coupling socket for injection molds with GZ without valve, DYROS series 6 be used with gases other than compressed air?

Quick coupling socket for injection molds with GZ without valve, DYROS series 6 can be used with gases other than compressed air, but with important caveats. Product features relevant to gases: - Designed applications include compressed air, gas cylinders and technical fields, indicating compatibility with gases in general. - All components are brass; retaining rings, springs and balls are stainless steel; seals are Viton. - Working pressure up to 15 bar. Considerations and limitations: - Viton seals are chemically resistant to many gases (including hydrocarbons, refrigerants and many industrial gases) and perform well across a wide temperature range, but compatibility should be checked for specific gases (e.g., oxygen, hydrogen, chlorine, ammonia) because some gases can cause degradation, swelling, or embrittlement of seals or react with brass. - Brass is generally suitable for many non-corrosive gases, but is not recommended for use with hydrogen at high pressure over time (risk of embrittlement or permeation) and can react with ammonia or certain corrosive gases. - Safety and purity: for oxygen service, special cleaning and materials are required to avoid fire/explosion risks; standard brass and Viton assemblies may not be oxygen-clean. - Pressure rating (15 bar) must not be exceeded; consider temperature effects on seal performance and pressure limits. - Leak tightness and regulatory/safety requirements for specific gases (toxic, flammable, or corrosive) may necessitate additional certifications or fittings. Recommendation: You can use Quick coupling socket for injection molds with GZ without valve, DYROS series 6 with gases other than compressed air for many common industrial gases, provided you verify chemical compatibility of brass and Viton with the specific gas, ensure the 15 bar limit and temperature range are respected, and confirm any special cleaning or certification (e.g., for oxygen, hydrogen, toxic or corrosive gases). For high-risk or critical applications, consult the manufacturer or a specialist to confirm suitability and safety measures.

Quick coupling socket for injection molds with GZ without valve, DYROS series 6

Additional information

Material	B – brass (bronze)

DYROS series 6 quick coupling socket with external thread without valve. Available with metric or BSP thread. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinders, and other technical fields. Material: all components are made of brass, while the retaining rings, springs, and balls are made of treated stainless steel. Sealing: viton. Working pressure: 15 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
DY-LKUM610-OV	Socket DN 6 with GZ M10x1, without valve	-	15	In stock	Enquiry
DY-LKUR614-OV	Socket DN 6 with GZ 1/4" BSP, without valve	-	15	In stock	Enquiry
DY-LKUR638-OV	Socket DN 6 with GZ 3/8" BSP, without valve	-	15	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

DYROS series 6 quick coupling socket with external thread without valve. Available with metric or BSP thread. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinders, and other technical fields. Material: all components are made of brass, while the retaining rings, springs, and balls are made of treated stainless steel. Sealing: viton. Working pressure: 15 bar.