Is the Quick coupling socket for injection molds with hose end without valve, DYROS series 90 compatible with coolant fluids and compressed air up to 15 bar?

Yes. The Quick coupling socket for injection molds with hose end without valve, DYROS series 90 is compatible with coolant fluids and compressed air up to 15 bar. It is specifically designed for cooling liquids for molds in plastic processing and for compressed air installations. Construction materials (brass body, treated stainless steel retaining rings/springs/balls) and Viton sealing support resistance to typical coolants and compressed air at the specified working pressure of 15 bar.

Can the Quick coupling socket for injection molds with hose end without valve, DYROS series 90 be used with gas cylinders and other technical gases?

Yes. The Quick coupling socket for injection molds with hose end without valve, DYROS series 90 is suitable for use with gas cylinders and other technical gases. It is designed for cooling liquids for molds in plastic processing, compressed air installations, gas cylinders, and other technical fields. Materials (brass components, treated stainless steel retaining rings/springs/balls) and Viton seals support chemical and pressure resistance, and the working pressure is rated to 15 bar. Ensure compatibility with the specific gas and application conditions (temperature, gas corrosiveness, safety regulations) before use.

Does the Quick coupling socket for injection molds with hose end without valve, DYROS series 90 resist corrosion in saline or acidic cooling fluids?

Quick coupling socket for injection molds with hose end without valve, DYROS series 90 offers reasonable resistance to many cooling fluids but has limitations with saline and strongly acidic media. Why: - Main body: brass. generally resistant to water and many neutral or mildly alkaline/acidic solutions but can corrode or dezincify in chloride-rich (saline) environments. - Retaining rings, springs, balls: treated stainless steel. provides improved corrosion resistance, but performance depends on stainless steel grade and aggressiveness of the fluid; some stainless steels can still corrode in high-chloride or low-pH conditions. - Seals: Viton. chemically resistant to many acids, oils and solvents, and performs well in many cooling fluids; however, compatibility should be checked for very strong acids or specific additives. - Working pressure: 15 bar. unrelated to chemical resistance but indicates suitability under pressure. Practical conclusion: - For mild cooling fluids and non-corrosive environments, Quick coupling socket for injection molds with hose end without valve, DYROS series 90 should be suitable. - For saline (chloride-rich) or strongly acidic cooling fluids, there is a risk of brass corrosion (including dezincification) and possible stainless steel attack depending on grade and concentration. Therefore, DYROS series 90 is not recommended for prolonged exposure to saline or highly acidic cooling fluids without prior compatibility verification. Recommendation: perform a compatibility test with the specific fluid (concentration, temperature) or consult the manufacturer for material grades and long-term corrosion data.

Quick coupling socket for injection molds with hose end without valve, DYROS series 90

Additional information

Material	B – brass (bronze)

DYROS series 90 quick coupling socket with hose end without valve. Designed for cooling liquids for molds in plastic processing, compressed air installations, gas cylinders, and other technical fields. Material: all components are made of brass, while the retaining rings, springs, and balls are made of treated stainless steel. Sealing: viton. Working pressure: 15 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
DY-LK918-OV	DN 9 socket with 1/2" hose end, without valve	12	15	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

DYROS series 90 quick coupling socket with hose end without valve. Designed for cooling liquids for molds in plastic processing, compressed air installations, gas cylinders, and other technical fields. Material: all components are made of brass, while the retaining rings, springs, and balls are made of treated stainless steel. Sealing: viton. Working pressure: 15 bar.