Is the One-piece steel EAR CLIP ring with 2 ears, carbon steel suitable for reinforced and non-reinforced low-pressure hoses?

Yes. The One-piece steel EAR CLIP ring with 2 ears, carbon steel is suitable for both reinforced and non-reinforced low-pressure hoses. The product description explicitly states it is designed for mounting various types of low-pressure hoses "reinforced with a braid or without reinforcement." Its galvanized carbon steel construction offers durability and corrosion resistance, while the rounded inner edges protect the hose from damage during clamping. Assembly is fast and secure using the specially designed pliers, ensuring a reliable seal on low-pressure applications.

Can One-piece steel EAR CLIP ring with 2 ears, carbon steel be installed without special tools?

One-piece steel EAR CLIP ring with 2 ears, carbon steel cannot be reliably installed without special tools. The product description specifies "easy and quick assembly using specially designed pliers," which are needed to properly compress the ears and form a secure, even clamp. Attempting installation with improvised tools risks uneven compression, hose damage, or an insecure fit despite the ringâs rounded internal edges and galvanized carbon steel construction. For safe, durable installation use the recommended ear-clip pliers.

How do I choose the correct size of One-piece steel EAR CLIP ring with 2 ears, carbon steel for my hose?

To choose the correct size of One-piece steel EAR CLIP ring with 2 ears, carbon steel for your hose, follow these steps: 1. Measure the hose outer diameter (OD) at the spot where the clamp will sit. Use calipers for best accuracy. If the hose is covered by a braid, measure over the braid. 2. Select a clamp size whose nominal diameter matches the measured OD. The One-piece steel EAR CLIP ring with 2 ears, carbon steel is designed for low-pressure hoses; it must fit snugly but not overstretch the ring beyond its working range. 3. Account for hose compression: when tightened with the specially designed pliers the clamp will compress the hose slightly. If your hose wall is thick or heavily reinforced, choose the clamp size closer to the measured OD; for thin-walled hoses choose the next larger size to avoid over-compression. 4. Consider application and clearance: ensure the clamp width and ear position do not interfere with fittings or moving parts. Rounded edges inside the ring protect the hose from damage, so position the clamp where it wonât rub against sharp edges. 5. Material and environment: the One-piece steel EAR CLIP ring with 2 ears, carbon steel is galvanized for corrosion resistance. For highly corrosive or outdoor marine environments consider a stainless alternative if needed. 6. Verify with a test fit: before final installation, place the clamp around the hose and close the ears with the recommended pliers to confirm secure fit and no hose deformation or slippage. Following these steps ensures the One-piece steel EAR CLIP ring with 2 ears, carbon steel fits properly, provides a tight seal, and protects the hose from damage.

One-piece steel EAR CLIP ring with 2 ears, carbon steel

All products, Clamps for mounting ends/

Additional information

Material	CS – steel (cast iron)

EAR CLIP clamp ring with 2 ears for mounting various types of low-pressure hoses reinforced with a braid or without reinforcement. Easy and quick assembly using specially designed pliers. Rounded edges inside the ring protect the hose from damage. Material: galvanized carbon steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AB-03012099	Clamp ring. EAR CLIP-2 10÷12 mm, W1	-	-	In stock	Enquiry
AB-03012101	Clamp ring. EAR CLIP-2 5÷7 mm, W1	-	-	In stock	Enquiry
AB-03012110	Clamp ring. EAR CLIP-2 7÷9 mm, W1	-	-	In stock	Enquiry
AB-03012128	Clamp ring. EAR CLIP-2 9÷11 mm, W1	-	-	In stock	Enquiry
AB-03012136	Clamp ring. EAR CLIP-2 11÷13 mm, W1	-	-	In stock	Enquiry
AB-03012144	Clamp ring. EAR CLIP-2 13÷15 mm, W1	-	-	In stock	Enquiry
AB-03012152	Clamp ring. EAR CLIP-2 14÷17 mm, W1	-	-	In stock	Enquiry
AB-03012160	Clamp ring. EAR CLIP-2 15÷18 mm, W1	-	-	In stock	Enquiry
AB-03012179	Clamp ring. EAR CLIP-2 17÷20 mm, W1	-	-	In stock	Enquiry
AB-03012187	Clamp ring. EAR CLIP-2 18÷21 mm, W1	-	-	In stock	Enquiry
AB-03012195	Clamp ring. EAR CLIP-2 20÷23 mm, W1	-	-	In stock	Enquiry
AB-03012208	Clamp ring. EAR CLIP-2 22÷25 mm, W1	-	-	In stock	Enquiry
AB-03012216	Clamp ring. EAR CLIP-2 23÷27 mm, W1	-	-	In stock	Enquiry
AB-03012224	Clamp ring. EAR CLIP-2 25÷28 mm, W1	-	-	In stock	Enquiry
AB-03012232	Clamp ring. EAR CLIP-2 28÷31 mm, W1	-	-	In stock	Enquiry
AB-03012240	Clamp ring. EAR CLIP-2 31÷34 mm, W1	-	-	In stock	Enquiry
AB-03012259	Clamp ring. EAR CLIP-2 34÷37 mm, W1	-	-	In stock	Enquiry
AB-03012267	Clamp ring. EAR CLIP-2 37÷40 mm, W1	-	-	In stock	Enquiry
AB-03012275	Clamp ring. EAR CLIP-2 40÷43 mm, W1	-	-	In stock	Enquiry
AB-03012283	Clamp ring. EAR CLIP-2 43÷46 mm, W1	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

EAR CLIP clamp ring with 2 ears for mounting various types of low-pressure hoses reinforced with a braid or without reinforcement. Easy and quick assembly using specially designed pliers. Rounded edges inside the ring protect the hose from damage. Material: galvanized carbon steel.