Is the One-piece steel EAR CLIP ring with 1 eye, stainless steel suitable for repeated reuse after installation, or is it single-use only?

The One-piece steel EAR CLIP ring with 1 eye, stainless steel is intended as a permanent, single-installation clamp. Its design.one-piece ear that is crimped closed with special pliers.creates a fixed, non-adjustable closure that securely compresses the hose. Because the ear is deformed to lock the clamp, it cannot be reliably reopened and reused without compromising the clampâs shape, clamping force and corrosion resistance. For repeated reuse or adjustable fastening, choose a reusable hose clamp type (e.g., screw/ worm-drive or ear clamps specifically marketed as reusable). Use a new One-piece steel EAR CLIP ring with 1 eye, stainless steel for each installation to ensure proper sealing and safety.

Can the One-piece steel EAR CLIP ring with 1 eye, stainless steel be used on hoses with different braid reinforcements?

Yes. The One-piece steel EAR CLIP ring with 1 eye, stainless steel is designed for mounting various types of low-pressure hoses both with braid reinforcement and without. Its rounded inner edges protect the hose from damage, and easy, quick installation with specially designed pliers ensures a secure fit across different braid types. Made from AISI 304 stainless steel, it provides corrosion resistance suitable for many applications.

Does the One-piece steel EAR CLIP ring with 1 eye, stainless steel resist corrosion in marine environments?

One-piece steel EAR CLIP ring with 1 eye, stainless steel (material: AISI 304) offers good general corrosion resistance, but its suitability for marine environments is limited. AISI 304 is an austenitic stainless steel that resists oxidation and many corrosive agents; it performs well in atmospheres and freshwater. However, in chloride-rich environments (sea water, salty spray, tidal zones) 304 is prone to pitting and crevice corrosion over time. For continuous or long-term exposure to marine conditions, a higher-grade alloy such as AISI 316 (which contains molybdenum for better chloride resistance) is recommended. Practical guidance: - For occasional, short-term exposure to splash or humid coastal air, One-piece steel EAR CLIP ring with 1 eye, stainless steel may be acceptable if inspected and maintained regularly. - For direct contact with seawater, submerged use, or prolonged exposure to salty spray, choose clamps made of AISI 316 or specialist marine-grade materials to ensure reliable corrosion resistance and longer service life. - Additional protection measures (regular rinsing with fresh water, protective coatings, or sacrificial anodes) can extend the life of AISI 304 in borderline marine situations.

One-piece steel EAR CLIP ring with 1 eye, stainless steel

All products, Clamps for mounting ends/

Additional information

Material	SS – stainless steel

EAR CLIP clamp ring with 1 ear for mounting various types of low-pressure hoses reinforced with a braid or without reinforcement. Easy and quick installation using specially designed pliers. Rounded edges inside the ring protect the hose from damage. Material: AISI 304 steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AB-23012010	Clamp ring. EAR CLIP-1 9÷11 mm, W4	-	-	In stock	Enquiry
AB-23012028	Clamp ring. EAR CLIP-1 10÷12 mm, W4	-	-	In stock	Enquiry
AB-23012036	Clamp ring. EAR CLIP-1 11÷13 mm, W4	-	-	In stock	Enquiry
AB-23012044	Clamp ring. EAR CLIP-1 12÷14 mm, W4	-	-	In stock	Enquiry
AB-23012052	Clamp ring. EAR CLIP-1 14÷16 mm, W4	-	-	In stock	Enquiry
AB-23012060	Clamp ring. EAR CLIP-1 16÷18 mm, W4	-	-	In stock	Enquiry
AB-23012079	Clamp ring. EAR CLIP-1 13÷15 mm, W4	-	-	In stock	Enquiry
AB-23012087	Clamp ring. EAR CLIP-1 8÷10 mm, W4	-	-	In stock	Enquiry
AB-23012423	Clamp ring. EAR CLIP-1 17÷19 mm, W4	-	-	In stock	Enquiry
AB-23012431	Clamp ring. EAR CLIP-1 18÷20 mm, W4	-	-	In stock	Enquiry
AB-23012440	Clamp ring. EAR CLIP-1 7÷9 mm, W4	-	-	In stock	Enquiry
AB-23012458	Clamp ring. EAR CLIP-1 15÷17 mm, W4	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

EAR CLIP clamp ring with 1 ear for mounting various types of low-pressure hoses reinforced with a braid or without reinforcement. Easy and quick installation using specially designed pliers. Rounded edges inside the ring protect the hose from damage. Material: AISI 304 steel.