Can the STORZ firefighter hose coupling with hose end, aluminum be used with food-grade liquids and meet hygiene standards?

Short answer: Most likely not suitable for direct contact with food-grade liquids without additional verification and certification. Explanation: The STORZ firefighter hose coupling with hose end, aluminum is described for broad industrial use including the food industry, but key details raise concerns for food-grade/hygiene compliance: - Material: aluminum can be used in food applications, but alloy composition and surface treatment matter. Food-contact approvals (e.g., FDA, EU 1935/2004) are not stated. - Seal: white NBR rubber is not inherently food-safe. NBR (nitrile) may leach additives and typically is not certified for food contact unless a specific food-grade compound/formulation and certification are provided. - Design & cleanability: while the coupling has a large unobstructed diameter, the text does not confirm sanitary design (smooth, crevice-free, drainable, washdown-compatible) required for hygiene standards (e.g., HACCP, CIP-compatible). - Certifications: no explicit mention of food-contact certifications, traceability, or compliance with relevant standards (EU/US food contact regulations, NSF, 3-A Sanitary Standards). Recommendation: Do not assume suitability. Ask the manufacturer/supplier for written documentation: alloy specification and surface finish, food-grade certification for the aluminum and the NBR seal (or availability of an approved food-grade seal such as EPDM or FDA-compliant silicone), evidence of sanitary design or CIP compatibility, and applicable compliance certificates (EU 1935/2004, FDA 21 CFR, NSF, or 3-A). If those are absent, request a food-grade variant or alternative coupling specifically certified for hygienic/food use.

Is the STORZ firefighter hose coupling with hose end, aluminum compatible with potable water systems and potable-water-approved fittings?

Based on the provided description, the STORZ firefighter hose coupling with hose end, aluminum is used across firefighting, irrigation, chemical, food industry and agriculture and features a white NBR rubber seal. However, compatibility with potable water systems and potable-water-approved fittings cannot be confirmed solely from this description. While aluminum bodies and NBR seals are frequently used with water, potable-water approval requires specific certifications (e.g., NSF/ANSI 61 or local potable-water approvals) and evidence that materials and manufacturing processes meet drinking-water safety standards. If potable-water use is required, request certification or manufacturer confirmation that the STORZ firefighter hose coupling with hose end, aluminum meets applicable potable-water material and certification requirements.

Does the STORZ firefighter hose coupling with hose end, aluminum resist corrosion from chemical cleaning agents?

STORZ firefighter hose coupling with hose end, aluminum offers good general corrosion resistance due to its aluminum construction, but its resistance to chemical cleaning agents depends on the specific chemicals and concentrations used. Important points: - Aluminum corrosion behavior: Aluminum forms a protective oxide layer that protects against many environments, but it is vulnerable to strong acids, strong alkalis, and halide-containing agents (chlorides, bromides) which can cause pitting or etching. - Seal compatibility: The coupling uses a white NBR (nitrile) rubber seal. NBR resists oils, hydrocarbons and many common cleaning agents but is degraded by strong oxidizers, some ketones, esters, chlorinated solvents, and certain aggressive acids/alkalis. - Practical implication: For mild, neutral or slightly alkaline cleaners (typical detergents, water-based degreasers) and non-chlorinated sanitizers, the coupling will generally perform acceptably. For aggressive chemical cleaners (strong acids, strong caustics, concentrated bleach/chlorinated solutions, concentrated solvents or oxidizers), both the aluminum body and the NBR seal may be attacked, shortening service life and risking leaks. - Recommendation: Check the exact chemical composition, concentration, temperature and exposure time of your cleaning agents. If aggressive chemicals are present, consider alternative materials (stainless steel body, EPDM or Viton seals) or consult the manufacturer/supplier for chemical compatibility data and approved cleaning procedures to ensure safe long-term use.

STORZ firefighter hose coupling with hose end, aluminum

All products, Symmetrical claw couplings/

Additional information

Material	AL – aluminum

STORZ coupling for pressure hoses with a hose end designed for transmission installations for liquid and bulk substances. Used in firefighting, irrigation systems, chemical industry, food industry, agriculture, etc. Characterized by a large, unobstructed diameter of flow. With a symmetrical design of the connecting part, allowing for easy connection. Elements with the same spacing of hooks can be connected. Available in a cast version. Material: aluminum. Working pressure: 16 bar. Seal: white NBR rubber.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
ST-11-059045-16	STORZ connector 59 mm with end for 45 mm pressure hose, Al	45	16	In stock	Enquiry
ST-11-066040-16	STORZ connector 66 mm with end for 40 mm pressure hose, Al	40	16	In stock	Enquiry
ST-11-066042-16	STORZ connector 66 mm with end for pressure hose 42 mm, Al	40	16	In stock	Enquiry
ST-11-066045-16	STORZ connector 66 mm with end for 45 mm pressure hose, Al	45	16	In stock	Enquiry
ST-11-066052-16	STORZ connector 66 mm with end for pressure hose 52 mm, Al	50	16	In stock	Enquiry
ST-11-066052-25	STORZ connector 66 mm with end for pressure hose 52 mm, aluminum casting	50	6	In stock	Enquiry
ST-11-066055-16	STORZ connector 66 mm with end for pressure hose 55 mm, Al	55	16	In stock	Enquiry
ST-11-081052-16	STORZ connector 81 mm with end for pressure hose 52 mm, Al	50	16	In stock	Enquiry
ST-11-081065-16	STORZ connector 81 mm with end for pressure hose 65 mm, Al	65	16	In stock	Enquiry
ST-11-081075-16	STORZ connector 81 mm with end for 75 mm pressure hose, Al	75	16	In stock	Enquiry
ST-11-089065-16	STORZ connector 89 mm with end for pressure hose 65 mm, Al	65	16	In stock	Enquiry
ST-11-089070-16	STORZ connector 89 mm with end for pressure hose 70 mm, Al	70	16	In stock	Enquiry
ST-11-089075-16	STORZ connector 89 mm with end for 75 mm pressure hose, Al	75	16	In stock	Enquiry
ST-11-089075-25	STORZ connector 89 mm with end for 75 mm pressure hose, aluminum casting	75	6	In stock	Enquiry
ST-11-115100-16	STORZ connector 115 mm with end for 100 mm pressure hose, Al	100	16	In stock	Enquiry
ST-11-133100-11	STORZ connector 133 mm with end for 100 mm pressure hose, Al	100	16	In stock	Enquiry
ST-11-133110-11	STORZ connector 133 mm with end for pressure hose 110 mm, Al	110	16	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

STORZ coupling for pressure hoses with a hose end designed for transmission installations for liquid and bulk substances. Used in firefighting, irrigation systems, chemical industry, food industry, agriculture, etc. Characterized by a large, unobstructed diameter of flow. With a symmetrical design of the connecting part, allowing for easy connection. Elements with the same spacing of hooks can be connected. Available in a cast version. Material: aluminum. Working pressure: 16 bar. Seal: white NBR rubber.