Is the STORZ plastic firefighter connector with aluminum hose end compatible with standard Storz couplings and suitable for potable liquids?

Yes . the STORZ plastic firefighter connector with aluminum hose end is compatible with standard Storz couplings and suitable for many liquid transfer uses, with some caveats. Compatibility with standard Storz couplings - The coupling uses the Storz symmetrical design and standard coupling spacing, so it can be connected to other elements that share the same Storz dimensions. Functionally it will mate with standard Storz couplings of the same size. Suitability for potable liquids - The coupling body is highâstrength plastic and the hose end is aluminum, with a black NBR rubber seal. NBR (nitrile) is commonly used for general liquid sealing but is not universally certified for potable water . it can impart taste/odour and may not meet all drinkingâwater approvals. - Aluminum may also raise compatibility concerns for longâterm potable water use (corrosion, leaching) unless specifically certified for drinking water. Conclusion - Mechanically compatible with standard Storz couplings of the same size. - Appropriate for firefighting, irrigation, chemical, food and agricultural uses per the description, but for potable (drinking) water you should verify material certifications and regulatory approvals (potableâwater certification for plastic, aluminum and NBR) before use.

Can the STORZ plastic firefighter connector with aluminum hose end withstand chemical exposure and maintain seal integrity?

STORZ plastic firefighter connector with aluminum hose end can resist some chemical exposures but suitability depends on the specific chemicals, concentrations and temperatures. Construction details: highâstrength plastic coupling, aluminum hose end, black NBR rubber seal, working pressure 10 bar. NBR seals have good resistance to oils, water, some fuels and dilute acids/alkalis, but poor resistance to strong acids, ketones (e.g. acetone), chlorinated hydrocarbons, and certain solvents. Aluminum and the plastic body can corrode or degrade with aggressive chemicals. For reliable seal integrity under chemical exposure, verify compatibility of NBR, aluminum and the plastic with the exact chemicals and conditions (concentration, temperature, exposure duration). When in doubt, test with the intended fluid or choose materials rated for the specific chemicals (e.g. EPDM, Viton, stainless fittings).

Does the STORZ plastic firefighter connector with aluminum hose end meet food industry hygiene standards for liquids?

Based on the provided description, the STORZ plastic firefighter connector with aluminum hose end is designed for use in many sectors including the food industry, but the description alone does not guarantee it meets food-industry hygiene standards for liquids. Relevant points from the description: - Intended applications include the food industry, which indicates possible suitability. - Materials: high-strength plastic body, aluminum hose end, and black NBR rubber seal. - Large unobstructed flow diameter and symmetrical design aid cleanability and flow, but do not alone ensure compliance. - Working pressure 10 bar. a performance spec, not a hygiene cert. Key hygiene considerations not confirmed by the description: - Material safety: For food contact, materials must be food-grade and compliant with relevant regulations (e.g., EU Regulation 1935/2004, FDA food-contact approvals). The description does not state specific food-grade certifications for the plastic, aluminum alloy, or NBR compound. - Cleanability and sanitary design: While unobstructed flow helps, sanitary fittings often require smooth, crevice-free surfaces, specific surface roughness (Ra) limits, and hygienic geometry. These details are not provided. - Chemical resistance and leachables: Compatibility with the specific liquids (acids, oils, alcohols) and absence of harmful leachables must be verified. - Certification and traceability: No mention of conformity certificates (e.g., NSF, EC 1935/2004 declarations, FDA CFR) or manufacturing traceability. Conclusion: The STORZ plastic firefighter connector with aluminum hose end may be suitable for some food-industry applications, but you must obtain manufacturer documentation certifying food-contact compliance (specific food-grade material declarations, relevant EU/FDA/NSF certifications, surface finish specs, and cleaning/sterilization compatibility) for your intended liquid. Without those documents, you cannot assume it meets food hygiene standards.

STORZ plastic firefighter connector with aluminum hose end

All products, Symmetrical claw couplings/

Additional information

Material	AL – aluminum

STORZ plastic coupling with hose end designed for transmission installations for liquid and bulk substances. Used in firefighting, irrigation systems, chemical industry, food industry, agriculture, etc. Characterized by a large, unobstructed flow diameter. Symmetrical design of the connecting part, allowing for easy connection. Elements with the same coupling spacing can be connected. Available with a short hose end. Coupling material: high-strength plastic. End material: aluminum. Working pressure: 10 bar. Seal: black NBR rubber.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
ST-11-066042-65	STORZ coupling 66 mm with end for pressure hose 42 mm, Al	40	10	In stock	Enquiry
ST-11-066052-65	STORZ coupling 66 mm with end for pressure hose 52 mm, Al	50	10	In stock	Enquiry
ST-12-066019-60	STORZ connector 66 mm with end for 19 mm hose, Al	20	16	In stock	Enquiry
ST-12-066025-60	STORZ connector 66 mm with end for 25 mm hose, Al	25	16	In stock	Enquiry
ST-12-066032-60	STORZ connector 66 mm with end for 32 mm hose, Al	32	16	In stock	Enquiry
ST-12-066038-60	STORZ connector 66 mm with end for hose 38 mm, Al	38	16	In stock	Enquiry
ST-12-066040-60	STORZ connector 66 mm with end for hose 40 mm, Al	40	16	In stock	Enquiry
ST-12-066042-60	STORZ connector 66 mm with end for hose 42 mm, Al	40	16	In stock	Enquiry
ST-12-066045-60	STORZ connector 66 mm with end for hose 45 mm, Al	45	16	In stock	Enquiry
ST-12-066050-60	STORZ connector 66 mm with end for 50 mm hose, Al	50	16	In stock	Enquiry
ST-12-066052-60	STORZ connector 66 mm with end for hose 52 mm, Al	50	16	In stock	Enquiry
ST-12-066055-60	STORZ connector 66 mm with end for hose 55 mm, Al	55	16	In stock	Enquiry
ST-12-066060-60	STORZ connector 66 mm with end for hose 60 mm, Al	60	16	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

STORZ plastic coupling with hose end designed for transmission installations for liquid and bulk substances. Used in firefighting, irrigation systems, chemical industry, food industry, agriculture, etc. Characterized by a large, unobstructed flow diameter. Symmetrical design of the connecting part, allowing for easy connection. Elements with the same coupling spacing can be connected. Available with a short hose end. Coupling material: high-strength plastic. End material: aluminum. Working pressure: 10 bar. Seal: black NBR rubber.