Is the STORZ firefighter connector with hose end under RS clamp, aluminum compatible with standard firefighting hoses and couplings?

Yes . the STORZ firefighter connector with hose end under RS clamp, aluminum is compatible with standard firefighting hoses and couplings that use the Storz system, provided a few conditions are met: - Connection type: It is a Storz-type coupling; it will mate with other Storz couplings (same hook spacing and size). Ensure the counterpart is the same Storz size (diameter) and hook spacing. - Material and application: Made of aluminum and rated for 16 bar working pressure, suitable for typical firefighting, irrigation and industrial uses described. - Seal compatibility: Fitted with a white NBR rubber seal, suitable for water and many common firefighting agents; confirm chemical compatibility if special foams or aggressive agents are used. - Flow and design: Large unobstructed bore and symmetrical connecting part ensure easy, low-restriction connection consistent with standard firefighting hose performance. In summary, the STORZ firefighter connector with hose end under RS clamp, aluminum will work with standard Storz firefighting hoses and couplings when size, hook spacing and seal compatibility are matched.

Can the STORZ firefighter connector with hose end under RS clamp, aluminum be used for food-grade liquid transfer applications?

Yes - the STORZ firefighter connector with hose end under RS clamp, aluminum can be used for food-grade liquid transfer in many cases: the description lists the food industry among intended applications, it has a large unobstructed flow, symmetrical easy-connecting design, and a white NBR rubber seal. However, for strict food-grade compliance you must verify: (1) the NBR compound is certified for contact with your specific food/liquid and temperatures; (2) the aluminum alloy and any surface treatments/coatings are approved for food contact and resistant to your product and cleaning agents; (3) cleaning/sanitization procedures (e.g., CIP, chemicals, temperatures) are compatible; and (4) any applicable local/regulatory standards (EU, FDA or other) are met. If in doubt, obtain manufacturer certification or choose components explicitly certified for food contact.

Is the STORZ firefighter connector with hose end under RS clamp, aluminum suitable for saltwater or marine use?

Yesâwith reservations. STORZ firefighter connector with hose end under RS clamp, aluminum can be used in saltwater or marine environments, but aluminum has limitations in such conditions. Advantages: light weight, good flow, large unobstructed diameter, and white NBR seal suitable for many fluids. However, aluminum is susceptible to corrosion (pitting, galvanic corrosion) in seawater, especially where dissimilar metals or stray currents are present. The white NBR rubber is generally resistant to seawater for typical service, but long-term exposure to oils, fuels, or strong chemicals common in marine environments may degrade it. Recommendations: - For occasional or short-term use in saltwater (freshwater-diluted conditions, rinsed and dried after use), it is acceptable. - For continuous immersion, permanent marine installations, or exposure to brackish water and seawater spray, consider corrosion protection (anodizing, protective coatings) or choose marine-grade materials (e.g., stainless steel or bronze/brass) to avoid accelerated corrosion and galvanic issues. - Ensure compatibility with other connected components to prevent galvanic corrosion (use isolating flanges or matching metals). - Implement regular inspection, cleaning, and maintenance; rinse with fresh water after use and check seals for deterioration. Conclusion: STORZ firefighter connector with hose end under RS clamp, aluminum can be used in marine settings for limited or intermittent applications if properly maintained and protected, but for long-term or critical marine service a more corrosion-resistant material is recommended.

STORZ firefighter connector with hose end under RS clamp, aluminum

All products, Symmetrical claw couplings/

Additional information

Material	AL – aluminum

STORZ coupling with a hose end for RS clamp intended for transmission installations for liquid and bulk substances. Used in firefighting, irrigation systems, chemical industry, food industry, agriculture, etc. Characterized by a large, unobstructed diameter of flow. With a symmetrical design of the connecting part, allowing for easy connection. Elements with the same hook spacing can be connected. Material: aluminum. Working pressure: 16 bar. Seal: white NBR rubber.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
ST-13-031025-11	STORZ connector 31 mm with RS end for 25 mm hose, Al	25	16	In stock	Enquiry
ST-13-066038-11	STORZ connector 66 mm with RS end for 38 mm hose, Al	38	16	In stock	Enquiry
ST-13-066050-11	STORZ connector 66 mm with RS end for 50 mm hose, Al	50	16	In stock	Enquiry
ST-13-089063-11	STORZ connector 89 mm with RS end for 63 mm hose, Al	65	16	In stock	Enquiry
ST-13-089075-11	STORZ connector 89 mm with RS end for 75 mm hose, Al	75	16	In stock	Enquiry
ST-13-115100-11	STORZ connector 115 mm with RS end for 100 mm hose, Al	100	16	In stock	Enquiry
ST-13-133100-11	STORZ connector 133 mm with RS end for 100 mm hose, Al	100	16	In stock	Enquiry
ST-13-148125-11	STORZ connector 148 mm with RS end for 125 mm hose, Al	125	16	In stock	Enquiry
ST-13-160150-11	STORZ connector 160 mm with RS end for 150 mm hose, Al	150	16	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

STORZ coupling with a hose end for RS clamp intended for transmission installations for liquid and bulk substances. Used in firefighting, irrigation systems, chemical industry, food industry, agriculture, etc. Characterized by a large, unobstructed diameter of flow. With a symmetrical design of the connecting part, allowing for easy connection. Elements with the same hook spacing can be connected. Material: aluminum. Working pressure: 16 bar. Seal: white NBR rubber.