Is the STORZ firefighter connector with BSP male thread, brass compatible with standard BSP-threaded pumps and pipes used in firefighting and irrigation systems?

Yes . the STORZ firefighter connector with BSP male thread, brass Format is compatible with standard BSP-threaded pumps and pipes commonly used in firefighting and irrigation systems, with the following caveats: - Thread compatibility: It has an external BSP (British Standard Pipe) male thread, so it will mate correctly with standard BSP female-threaded fittings and ports. - Flow & sealing: Its large unobstructed flow diameter and black NBR rubber seal support reliable fluid transfer and leak-tight connections at typical operating conditions. - Pressure rating: Rated for 16 bar working pressure . suitable for most firefighting and irrigation applications but verify your systemâs maximum working pressure does not exceed 16 bar. - Material & applications: Brass construction is compatible with water and many common fluids used in firefighting, irrigation, agriculture, food and chemical industries; confirm chemical compatibility for aggressive media. - Mechanical fit: Symmetrical connection design and standard hook spacing allow easy coupling with other STORZ-compatible elements having the same spacing. Recommendation: Before installation, check that mating components use BSP threads (not NPT or other thread standards), confirm thread size matches, and ensure the system pressure and fluid compatibility align with the connectorâs specifications.

Can the STORZ firefighter connector with BSP male thread, brass be used with food-grade hoses and fittings without affecting contamination risk?

The STORZ firefighter connector with BSP male thread, brass may be used with food-grade hoses and fittings only with caution. Brass is common in food applications but can leach lead unless alloy is certified lead-free; the product description does not state a food-grade or lead-free brass certification. The black NBR rubber seal is not inherently food-grade-standard NBR can contain additives unsafe for food contact. Working pressure and flow are suitable, but contamination risk depends on materials' food-contact certification (brass alloy composition and seal material). Recommendation: verify manufacturer declarations/certificates (e.g., FDA, EU Regulation 1935/2004, WRAS, NSF) for both brass and seal before using with food-grade hoses; if uncertified, use components explicitly rated for food contact.

Does the STORZ firefighter connector with BSP male thread, brass require torque specs for leak-free installation?

Noâtorque specifications are not required for a leak-free installation of the STORZ firefighter connector with BSP male thread, brass, provided it is installed correctly. Explanation: The STORZ firefighter connector with BSP male thread, brass relies on a mechanical hose coupling design and an elastomeric seal (black NBR rubber) to achieve a leak-free joint. Correct installation focuses on: - Clean, undamaged mating threads and sealing surfaces. - Proper, intact NBR seal seated fully in its groove. - Hand-tight engagement to align the symmetrical connection parts, then secure the coupling by the standard STORZ hook/lug engagement (rotate and lock). The large unobstructed flow diameter and symmetric design aid easy connection. - Working pressure rating (16 bar) and material compatibility (brass and NBR) must be respected. When a BSP male thread is present on the adaptor, thread sealing practice depends on the threadâs function: if the BSP thread only positions the adaptor and the actual fluid seal is achieved by the NBR face seal, additional thread torque or thread sealant is unnecessary. If the BSP thread itself must provide a pressure-tight thread seal (rare in this STORZ adaptor design), use appropriate thread sealant/tape and tighten to the manufacturerâs or standard BSP torque guidelines for brass fittings to avoid distortionâavoid overtightening. If in doubt or for critical applications (high cycling, aggressive media, or regulatory requirements), consult the manufacturerâs instructions or engineering guidance for assembly, recommended thread sealing method, and any torque limits for the BSP thread to prevent damage to the brass component.

A STORZ fire coupling with a thread external BSP, brass

All products, Symmetrical claw couplings/

Additional information

Material	B – brass (bronze)

A STORZ adapter with a male BSP thread intended for transfer installations for liquid and bulk substances. Used in firefighting, irrigation systems, the chemical and food industry, agriculture, etc.. Characterized by a large, unobstructed flow diameter. With a symmetrical design of the connection part, thanks to which they can be easily connected together. Parts with the same lug spacing can be connected. Material: brass. Working pressure: 16 bar. Gasket: black NBR rubber.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
ST-22-031100-30	Adapter STORZ 31 mm with 1" BSP male, Ms	-	16	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

A STORZ adapter with a male BSP thread intended for transfer installations for liquid and bulk substances. Used in firefighting, irrigation systems, the chemical and food industry, agriculture, etc.. Characterized by a large, unobstructed flow diameter. With a symmetrical design of the connection part, thanks to which they can be easily connected together. Parts with the same lug spacing can be connected. Material: brass. Working pressure: 16 bar. Gasket: black NBR rubber.