Is LOCTITE 401 universal instant adhesive safe for use on food-contact surfaces given its P1 NSF No: 123000 certification?

LOCTITE 401 universal instant adhesive with P1 NSF No: 123000 indicates the product meets NSF P1 (formerly A1) criteria for non-food compound adhesives used in food processing, meaning it is acceptable for use on equipment and surfaces in food-processing areas where contact with food is unlikely but incidental contact may occur. P1 certification does NOT mean the adhesive is formulated to be applied directly to food or is a food-grade material safe for intentional, direct food contact. Practical implications: - Safe for use on equipment and surfaces in food facilities where the bond is not meant to contact food directly (e.g., fixing non-food-contact components, repairs out of the direct food zone). - Not recommended for applications where adhesive will be in direct, prolonged contact with food or for parts that are intentionally in contact with food (cutting boards, utensils, food containers). - Always follow manufacturerâs instructions, allow full cure time, and consider cleaning procedures and temperature exposure (â40Â°C to +120Â°C) as part of suitability assessment. - For direct food contact, seek adhesives specifically approved for food-contact use (e.g., NSF H1/H3 or explicit food-safe declarations) or consult LOCTITE technical/data sheet and your regulatory authority. Conclusion: LOCTITE 401 with P1 NSF No: 123000 can be used in food-processing environments for incidental contact/non-food-contact repairs, but it is not certified as safe for direct food-contact applications.

Can LOCTITE 401 universal instant adhesive withstand continuous exposure to temperatures up to +120Â°C without losing bond strength?

Yes. LOCTITE 401 universal instant adhesive is rated for an operating temperature range up to +120Â°C, so it can withstand continuous exposure to temperatures up to +120Â°C without losing bond strength, provided the substrates and joint design are appropriate. Full bond strength may take up to 24 hours depending on materials.

Does LOCTITE 401 universal instant adhesive bond effectively to painted or coated surfaces?

LOCTITE 401 universal instant adhesive can bond painted or coated surfaces, but effectiveness depends on the coating type and condition. The product is formulated for a wide range of substrates (metals, rubber, wood, cardboard, ceramics, and most plastics) and works on surfaces with acidic pH (e.g., chrome, galvanized), so it can adhere to many painted or coated finishes that present a compatible surface chemistry. Key considerations: - Surface cleanliness and preparation: Paint or coating must be clean, dry, and free of oil, dust, or releasing agents. Poorly adhered, flaking, or contaminated coatings will reduce bond strength. - Coating composition: Some coatings (soft, flexible, low-surface-energy paints or elastomeric finishes) may prevent optimal adhesion. Rigid, well-cured, high-surface-energy coatings (e.g., many alkyds, epoxies) are more likely to provide a strong bond. - Contact and gap: LOCTITE 401 delivers high joint strength when parts are in close contact with minimal gap; porous or uneven coatings that prevent intimate contact can weaken the bond. - Curing times: Initial handling strength in 3â10 seconds, full strength may take up to 24 hours depending on the materials and coating. Recommendation: For best results on painted or coated surfaces, test adhesion on a sample area and, if possible, lightly abrade and clean the coating to improve wetting and contact before applying LOCTITE 401 universal instant adhesive.

LOCTITE 401 universal instant adhesive

Adhesives and screw protections, All products/

Additional information

General-purpose instant adhesive. Bonds a wide range of substrates (metals, rubber, wood, cardboard, ceramics, and most plastics). Suitable for use on surfaces with an acidic pH, such as chrome or galvanized surfaces. Provides high joint strength when elements are closely adhered. Color: colorless. Operating temperature range: from -40°C to +120°C. Initial strength time: 3-10 seconds. Full strength time: up to 24 hours depending on the material. Certification: P1 NSF No: 123000. Packaging – container of 3 ml or 20 ml.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
LT-401-03	LOCTITE 401 Universal Instant Adhesive (3 ml)	-	-	In stock	0 zł		Enquiry
LT-401-20	LOCTITE 401 Universal Instant Adhesive (20 ml)	-	-	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

General-purpose instant adhesive. Bonds a wide range of substrates (metals, rubber, wood, cardboard, ceramics, and most plastics). Suitable for use on surfaces with an acidic pH, such as chrome or galvanized surfaces. Provides high joint strength when elements are closely adhered. Color: colorless. Operating temperature range: from -40°C to +120°C. Initial strength time: 3-10 seconds. Full strength time: up to 24 hours depending on the material. Certification: P1 NSF No: 123000. Packaging – container of 3 ml or 20 ml.