Can the Hydraulic system pressure measuring kit with quick coupler, without pressure gauges, TEMA SYSTEM 100 measure vacuum down to 90% and reliably seal during connection/disconnection?

Hydraulic system pressure measuring kit with quick coupler, without pressure gauges, TEMA SYSTEM 100 can measure vacuum down to 90% and reliably seal during connection/disconnection. The kit uses Swedish miniature measuring quick couplings DN1.2 with a classic push-to-connect design and valve-equipped socket and plug; manufacturer specifies leak-free connection/disconnection and tightness even at a vacuum of 90%. Measuring plugs are hardened steel and connections use Oârings (type A or B) for front-face sealing. Therefore, when used as intended (correct plug/socket types, intact NBR Oârings, proper mounting and maintenance), the set is rated to reliably seal and permit measurements down to 90% vacuum. Ensure compatible manometer, correct threading/adapters, and check Oâring condition before use for reliable performance.

Hydraulic system pressure measuring kit with quick coupler, without pressure gauges, TEMA SYSTEM 100

Q: Can the Hydraulic system pressure measuring kit with quick coupler, without pressure gauges, TEMA SYSTEM 100 use any 1/4â BSP manometer for measurements?

Yes. The Hydraulic system pressure measuring kit with quick coupler, without pressure gauges, TEMA SYSTEM 100 can use any suitable 1/4â BSP manometer. The kitâs measuring holder accepts a standard manometric connection with a 1/4â BSP external thread; sealing is achieved with a thread washer and an Oâring 10.8Ã2.2 (or a manometric washer inside the socket). The manufacturer specifically recommends a 63 mm manometer type FM-631 (bottom connection), but any manometer with the typical 1/4â BSP thread and appropriate pressure rating may be used. Ensure the chosen manometerâs pressure range and connection orientation (bottom connection recommended) are compatible with the kit and the hydraulic systemâs operating pressures.

All products, Measurement sets/

Additional information

Material	P – material (plastic)

The set is equipped with miniature measuring quick couplings DN1.2 manufactured in Sweden, designed for measuring static, dynamic pressure, and vacuum in hydraulic systems. Based on a classic “push to connect” quick coupling design with a locking mechanism consisting of balls, a spring, and a locking sleeve. The socket and plug are equipped with valves ensuring leak-free connection and disconnection and tightness, even at a vacuum of 90%. Measuring plugs made of hardened steel, durable and maintenance-free. Connections with external threads sealed using an O-ring recessed in the front surface (type A) or an O-ring at the front surface (type B). This ensures simple and quick configuration of connections. The remaining elements of the measuring set include manometers (not included in the set) mounted in measuring holders, adapters, and measuring hoses. The vent valve in the measuring holder allows for the removal of air bubbles from the system, which increases the accuracy of dynamic pressure measurement. The set can be used for pressure measurements on machines equipped with TEMA SYSTEM 100 measuring plugs (some working machines e.g., VOLVO, HIAB, SAMSUNG) or by installing plugs in the system during measurement. The flexible adapter TA-M-139 allows the set to be used for measurements on widely used connections with M16x2 threads. Any suitable type of manometer (not included in the set) with a typical manometric connection with a 1/4” BSP external thread can be used for measurements with the set. Recommended manometer version: 63 mm manometer type FM-631 – bottom connection. Sealing of the manometer in the holder socket using a thread washer and an O-ring 10.8×2.2, or a manometric washer inside the socket. The set is delivered in a plastic case and includes the following elements: 1. Measuring holder for low-pressure connection (manometer connection 1/4” BSP, quick coupling socket, vent). 2. Measuring plug, GZ 1/8″ BSP, type A, plastic cap. 3. Measuring hose (DN2, 630 bar), L=2.5 m with quick coupling plug TA-M-120 and socket TA-M-150. 4. Adapter, GW 1/4″ BSP / GZ 1/8″ BSP, type A. 5. Adapter, GW 1/8″ BSP / GZ 1/4″ BSP, type B. Sealing: NBR rubber. Working pressure: up to 600 bar, for plugs TA-M-120 – 400 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
TA-M-101	Basic measurement set TEMA SYSTEM 100 (without pressure gauges)	-	-	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

The set is equipped with miniature measuring quick couplings DN1.2 manufactured in Sweden, designed for measuring static, dynamic pressure, and vacuum in hydraulic systems. Based on a classic “push to connect” quick coupling design with a locking mechanism consisting of balls, a spring, and a locking sleeve. The socket and plug are equipped with valves ensuring leak-free connection and disconnection and tightness, even at a vacuum of 90%. Measuring plugs made of hardened steel, durable and maintenance-free. Connections with external threads sealed using an O-ring recessed in the front surface (type A) or an O-ring at the front surface (type B). This ensures simple and quick configuration of connections. The remaining elements of the measuring set include manometers (not included in the set) mounted in measuring holders, adapters, and measuring hoses. The vent valve in the measuring holder allows for the removal of air bubbles from the system, which increases the accuracy of dynamic pressure measurement. The set can be used for pressure measurements on machines equipped with TEMA SYSTEM 100 measuring plugs (some working machines e.g., VOLVO, HIAB, SAMSUNG) or by installing plugs in the system during measurement. The flexible adapter TA-M-139 allows the set to be used for measurements on widely used connections with M16x2 threads. Any suitable type of manometer (not included in the set) with a typical manometric connection with a 1/4” BSP external thread can be used for measurements with the set. Recommended manometer version: 63 mm manometer type FM-631 – bottom connection. Sealing of the manometer in the holder socket using a thread washer and an O-ring 10.8×2.2, or a manometric washer inside the socket. The set is delivered in a plastic case and includes the following elements: 1. Measuring holder for low-pressure connection (manometer connection 1/4” BSP, quick coupling socket, vent). 2. Measuring plug, GZ 1/8″ BSP, type A, plastic cap. 3. Measuring hose (DN2, 630 bar), L=2.5 m with quick coupling plug TA-M-120 and socket TA-M-150. 4. Adapter, GW 1/4″ BSP / GZ 1/8″ BSP, type A. 5. Adapter, GW 1/8″ BSP / GZ 1/4″ BSP, type B. Sealing: NBR rubber. Working pressure: up to 600 bar, for plugs TA-M-120 – 400 bar.