Can the Double-sided plug end with "tail" for hose fit a 6 mm hose and allow pumping the wheel from both outer and inner sides?

Yes. The Double-sided plug end with "tail" for hose is designed for a 6 mm hose and allows pumping the wheel from both the outer and inner sides. Made of brass, it features a practical handle and a tail of suitable diameter and length, without special hooks, so it reaches hard-to-access valves easily while permitting access from either side of the wheel.

How do I use the Double-sided plug end with "tail" for hose to reach recessed wheel valves?

Use the Double-sided plug end with "tail" for hose Format by attaching a 6 mm hose to either side of the brass fitting-one side for the outer valve access, the other for inner/recessed valve access. The âtailâ lets the hose reach deep into the wheel; simply insert the tail end straight into the recessed valve stem, using the practical handle to position and hold the fitting steady. Pump through the hose while keeping the fitting aligned; its smooth length and lack of hooks let you maneuver past spokes and tight spaces without catching. After inflation, pull the tail straight out to avoid bending the valve.

Is the Double-sided plug end with "tail" for hose compatible with other hose diameters besides 6 mm?

Double-sided plug end with "tail" for hose described is specifically designed for a 6 mm hose. Its dimensions and tail diameter match that size, so compatibility with other hose diameters is not guaranteed. Possible scenarios: - If another hose has an outer diameter very close to 6 mm, you might achieve a snug fit, but sealing will likely be imperfect and unreliable for pumping pressure. - A smaller hose could potentially be stretched over the tail, risking damage to the hose or an insecure connection. - A larger hose will not fit without an adapter or modification. For reliable, leak-free use, choose a hose of 6 mm or use an appropriate adapter/reducer designed to match the Double-sided plug end with "tail" for hose to a different hose diameter.

Double-sided plug end with “tail” for hose

Additional information

Material	B – brass (bronze)

Dual-sided plug end with a “tail” for a 6 mm hose, allowing for pumping the wheel from both the outer and inner sides. Equipped with a practical handle for ease of use. The length and absence of special hooks enable easy access to hard-to-reach valves in the wheel. Material: brass.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
EW-15151	Double-sided plug end for 6 mm hose	-	-	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Dual-sided plug end with a “tail” for a 6 mm hose, allowing for pumping the wheel from both the outer and inner sides. Equipped with a practical handle for ease of use. The length and absence of special hooks enable easy access to hard-to-reach valves in the wheel. Material: brass.