Is the ISO-F hydraulic quick coupling, stainless steel BSP GW plug, type IF compatible with other manufacturers' ISO 16028 flat-face couplings?

Yes. The ISO-F hydraulic quick coupling, stainless steel BSP GW plug, type IF Format is designed to the ISO 16028 flat-face standard and is specified as interchangeable with ISO-F quick couplings from other manufacturers. Because it conforms to ISO 16028 dimensions and sealing principles (flat-face, leak-free connection) and uses common materials and seals (AISI 316 Ti steel, viton), it will be compatible with other manufacturersâ ISO 16028 flat-face couplings of the same size and rating. Ensure matching size, pressure rating (up to 315 bar depending on size), thread type (internal BSP), and seal material/temperature limits when mixing brands to guarantee safe operation.

Can the ISO-F hydraulic quick coupling, stainless steel BSP GW plug, type IF be used continuously at 315 bar in high-temperature environments?

ISO-F hydraulic quick coupling, stainless steel BSP GW plug, type IF: The plug is made of AISI 316 Ti with Viton seals rated -20Â°C to +200Â°C and a working pressure up to 315 bar (size-dependent) with a 4:1 safety factor. Continuous use at 315 bar in high-temperature environments is only acceptable if the operating temperature does not exceed +200Â°C and the specific coupling size is rated for 315 bar. Above +200Â°C Viton sealing will degrade, risking leaks and failure. Also verify size-specific pressure rating and application transient peaks; for elevated-temperature continuous duty consider alternative seals or materials rated beyond 200Â°C.

Does the ISO-F hydraulic quick coupling, stainless steel BSP GW plug, type IF require special maintenance for Viton seals?

The ISO-F hydraulic quick coupling, stainless steel BSP GW plug, type IF does not require special or unusual maintenance beyond standard practices for Viton (FKM) seals. Recommended maintenance: - Regular inspection: check seals for cuts, swelling, hardening or surface cracking at routine intervals or if leakage is suspected. - Cleanliness: keep mating faces and seal areas free of dirt, debris and aggressive contaminants to prevent abrasion or chemical attack. - Temperature and chemical compatibility: operate within the specified Viton temperature range (â20Â°C to +200Â°C) and avoid prolonged exposure to incompatible chemicals (strong amines, ketones, some esters or hot concentrated acids/bases) that can degrade Viton. - Lubrication: use compatible, non-reactive lubricants (Viton-compatible silicones or specific hydraulic lubricants) sparingly to aid assembly and protect seals. - Replacement: replace seals if any wear, deformation or leakage occurs; carry spare Viton seals sized for the IF type. - Storage: store spare couplings and seals in a cool, dark, dry place away from ozone sources and direct sunlight. Following these standard precautions ensures reliable performance up to the couplingâs rated pressure (up to 315 bar) and temperature limits.

ISO-F hydraulic quick coupling, stainless steel BSP GW plug, type IF

All products, Hydraulic quick couplings/

Additional information

Material	SS – stainless steel

Quick coupling plug PH type IF in ISO F standard with internal BSP thread. Leak-free “flat-face” connection. Designed mainly for industrial applications and hydraulic power systems. The quick coupling can be operated with one hand. Interchangeable with ISO-F quick couplings from other manufacturers. Standard: ISO 16028 (up to size 1″). Material: AISI 316 Ti steel. Sealing: viton (operating temperature from -20°C to +200°C). Working pressure: up to 315 bar (depending on the size of the quick coupling), safety factor 4:1. Flow rate is given at Δp = 3 bar [l/min].

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
PH-IF06-M-04G-SS	ISO F DN6 plug with 1/4" BSP female thread, AISI 316Ti, Viton	-	315	In stock	Enquiry
PH-IF10-M-06G-SS	ISO F DN10 plug with 3/8" BSP female thread, AISI 316Ti, Viton	-	250	In stock	Enquiry
PH-IF12-M-08G-SS	ISO F DN12 plug with 1/2" BSP female thread, AISI 316Ti, Viton	-	250	In stock	Enquiry
PH-IF16-M-12G-SS	ISO F DN16 plug with 3/4" BSP female thread, AISI 316Ti, Viton	-	250	In stock	Enquiry
PH-IF19-M-16G-SS	ISO F DN19 plug with 1" BSP female thread, AISI 316Ti, Viton	-	250	In stock	Enquiry
PH-IF25-M-20G-SS	ISO F connector DN25 with 1.1/4" BSP female thread, AISI 316Ti, Viton	-	200	In stock	Enquiry
PH-IF40-M-24G-SS	ISO F DN40 plug with 1.1/2" BSP female thread, AISI 316Ti, Viton	-	90	In stock	Enquiry
PH-IF50-M-32G-SS	ISO F DN50 plug with 2" BSP female thread, AISI 316Ti, Viton	-	60	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Quick coupling plug PH type IF in ISO F standard with internal BSP thread. Leak-free “flat-face” connection. Designed mainly for industrial applications and hydraulic power systems. The quick coupling can be operated with one hand. Interchangeable with ISO-F quick couplings from other manufacturers. Standard: ISO 16028 (up to size 1″). Material: AISI 316 Ti steel. Sealing: viton (operating temperature from -20°C to +200°C). Working pressure: up to 315 bar (depending on the size of the quick coupling), safety factor 4:1. Flow rate is given at Δp = 3 bar [l/min].