Is FP17051 NON CONDUCTIVE thermoplastic hose safe for use near high-voltage equipment and does it meet the <50 ÂµA leakage standard at 246 kV/m for 5 minutes?

Yes. FP17051 NON CONDUCTIVE thermoplastic hose is designed for use near transformers and medium/high-voltage installations and is described as non-conductive. It explicitly states that leakage during testing according to standards is less than 50 ÂµA when subjected to 246 kV/m for 5 minutes, meeting the <50 ÂµA leakage criterion. The hose complies with DIN 24951, SAE 100R7 and ISO 3949-R7 standards, has a polyester inner layer, double polyester braid reinforcement and an orange polyurethane outer layer, and is suitable for hydraulic oil, fuels and water-based fluids within its stated pressure and temperature ranges.

Can FP17051 NON CONDUCTIVE thermoplastic hose be used for transferring fuels and hydraulic oil near transformers and medium/high voltage installations?

Yes. FP17051 NON CONDUCTIVE thermoplastic hose is specified for hydraulic oil, fuels and water-based fluids and is intended for use near transformers and medium/high voltage electrical installations. It is non-conductive with leakage during testing <50 ÂµA at 246 kV/m for 5 minutes, meeting relevant standards (DIN 24951, SAE 100R7, ISO 3949-R7). Construction: polyester inner, double polyester braid reinforcement, orange polyurethane outer. Working pressure ranges 157â220 bar (by diameter). Operating temperature -40Â°C to +93Â°C (water up to +65Â°C). Ensure compatibility with the specific fuel/hydraulic fluid and follow site electrical safety and installation regulations.

Does FP17051 NON CONDUCTIVE thermoplastic hose withstand -40Â°C to +93Â°C operating temperatures?

Yes. FP17051 NON CONDUCTIVE thermoplastic hose is rated for an operating temperature range of -40Â°C to +93Â°C. Note: for water service the upper limit is +65Â°C.

FP17051 NON CONDUCTIVE thermoplastic hose

Q: Is FP17051 NON CONDUCTIVE thermoplastic hose safe for use near high-voltage equipment and does it meet the <50 ÂµA leakage standard at 246 kV/m for 5 minutes?

Yes. FP17051 NON CONDUCTIVE thermoplastic hose is designed for use near transformers and medium/high-voltage installations and is described as non-conductive. It explicitly states that leakage during testing according to standards is less than 50 ÂµA when subjected to 246 kV/m for 5 minutes, meeting the <50 ÂµA leakage criterion. The hose complies with DIN 24951, SAE 100R7 and ISO 3949-R7 standards, has a polyester inner layer, double polyester braid reinforcement and an orange polyurethane outer layer, and is suitable for hydraulic oil, fuels and water-based fluids within its stated pressure and temperature ranges.

Q: Can FP17051 NON CONDUCTIVE thermoplastic hose be used for transferring fuels and hydraulic oil near transformers and medium/high voltage installations?

Yes. FP17051 NON CONDUCTIVE thermoplastic hose is specified for hydraulic oil, fuels and water-based fluids and is intended for use near transformers and medium/high voltage electrical installations. It is non-conductive with leakage during testing <50 ÂµA at 246 kV/m for 5 minutes, meeting relevant standards (DIN 24951, SAE 100R7, ISO 3949-R7). Construction: polyester inner, double polyester braid reinforcement, orange polyurethane outer. Working pressure ranges 157â220 bar (by diameter). Operating temperature -40Â°C to +93Â°C (water up to +65Â°C). Ensure compatibility with the specific fuel/hydraulic fluid and follow site electrical safety and installation regulations.

Q: Does FP17051 NON CONDUCTIVE thermoplastic hose withstand -40Â°C to +93Â°C operating temperatures?

Yes. FP17051 NON CONDUCTIVE thermoplastic hose is rated for an operating temperature range of -40Â°C to +93Â°C. Note: for water service the upper limit is +65Â°C.

All products, Thermoplastic hoses/

Additional information

Material	PEE – polyester
Maximum operating temperature [°C]	93
Minimum operating temperature [°C]	-40
Vacuum resistance	check

Lightweight, flexible hose designed for hydraulic oil installations, fuels, water-based fluids. For use near transformers and medium and high voltage electrical installations. Non-conductive – leakage during testing according to standards less than 50 µA for voltage 246 kV/m for 5 minutes. Standards: DIN 24951, SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: orange polyurethane. Working pressure: from 157 bar to 220 bar, depending on hose diameter. Operating temperature: from -40°C to +93°C (for water up to +65°C).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MC-FP17051B-05	FP17051B NON-CONDUCTIVE thermoplastic hose 3/16"	5	220	In stock	Enquiry
MC-FP17051C-06	Thermoplastic hose FP17051C NON-CONDUCTIVE 1/4"	6	215	In stock	Enquiry
MC-FP17051D-08	Thermoplastic hose FP17051D NON-CONDUCTIVE 5/16"	8	195	In stock	Enquiry
MC-FP17051E-10	FP17051E NON-CONDUCTIVE thermoplastic hose 3/8"	10	187	In stock	Enquiry
MC-FP17051F-13	FP17051F NON-CONDUCTIVE thermoplastic hose 1/2"	12	157	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Lightweight, flexible hose designed for hydraulic oil installations, fuels, water-based fluids. For use near transformers and medium and high voltage electrical installations. Non-conductive – leakage during testing according to standards less than 50 µA for voltage 246 kV/m for 5 minutes. Standards: DIN 24951, SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: orange polyurethane. Working pressure: from 157 bar to 220 bar, depending on hose diameter. Operating temperature: from -40°C to +93°C (for water up to +65°C).