Can the Hand crimper TNT250/P with hydraulic pump MPT100 crimp angled fittings using the pass-through hose feature?

Yes. The Hand crimper TNT250/P with hydraulic pump allows passing the hose through the crimper head, which is specifically important for crimping angled fittings. The head supports sixâjaw crimping and the set includes 6 jaw sets for standard and reduced outer diameter hoses, grease, plastic caliper and case. With the passâthrough feature and the included jaws, TNT250/P with hydraulic pump can crimp angled fittings reliably at the specified crimping force (700 bar).

What hose sizes can the Hand crimper TNT250/P with hydraulic pump MPT100 accommodate when using the pass-through head?

Hand crimper TNT250/P with hydraulic pump Format (passâthrough head) accommodates standard hydraulic hose sizes using the included six sets of jaws. It crimps common sizes up to 1Â¼" (32 mm) nominal hose diameter equivalents (supports typical 1/4", 3/8", 1/2", 5/8", 3/4", 1" series), plus variants with reduced outer diameter using the supplied reducedâOD jaw sets. Exact compatible hose series and crimp diameters depend on the jaw set installed; the tool provides the specified crimping force at 700 bar to achieve proper crimps for these sizes.

Does the Hand crimper TNT250/P with hydraulic pump support crimping hoses with reduced OD using its six-jaw sets?

Yes. The Hand crimper TNT250/P with hydraulic pump supports crimping hoses with reduced outer diameter using its six-jaw sets. The toolâs head is designed to allow the hose to pass through (useful for angled fittings), and the supplied kit includes six sets of jaws specifically for both standard hoses and hoses with reduced OD. The set also contains grease, a plastic caliper, and a case. Crimping is performed using the manual hydraulic pump MPT100, with the specified crimping force at 700 bar.

Hand crimper TNT250/P with hydraulic pump

Additional information

Hand crimper TNT250/P (six-jaw crimping) with manual hydraulic pump MPT100. The crimper head allows for passing through the hose, which is important when crimping angled fittings. The set includes: 6 sets of jaws for standard hoses and those with reduced outer diameter, grease, plastic caliper, case. The specified crimping force at 700 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
PF-TNT250-P	Clamp for air conditioning. TNT250/B with pump MPT100	-	-	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Hand crimper TNT250/P (six-jaw crimping) with manual hydraulic pump MPT100. The crimper head allows for passing through the hose, which is important when crimping angled fittings. The set includes: 6 sets of jaws for standard hoses and those with reduced outer diameter, grease, plastic caliper, case. The specified crimping force at 700 bar.