Is the Rotary end with GZ BSPT without flange, stainless steel, type AK suitable for continuous rotation under 40 bar in washing-hose water-gun applications?

Yes. The Rotary end with GZ BSPT without flange, stainless steel, type AK is suitable for continuous rotation under 40 bar in washing-hose water-gun applications. It is specifically designed for installation in industrial hoses at the connection point with the water gun where rotation is required, is manufactured from corrosion-resistant AISI 316 stainless steel, and is rated for working pressures up to 40 bar. For reliable long-term performance ensure correct installation, compatible mating thread sealing (BSPT tapered), adequate hose support to avoid side loads, and regular inspection for wear or damage.

Can the Rotary end with GZ BSPT without flange, stainless steel, type AK withstand frequent rotation cycles at 40 bar in washing-hose water-gun setups?

Yes. The Rotary end with GZ BSPT without flange, stainless steel, type AK is specifically designed for installation in industrial washing hoses at the connection with the water gun and for applications requiring repeated rotation. Made from AISI 316 stainless steel and rated for working pressures up to 40 bar, it is suitable for frequent rotation cycles in washing-hose water-gun setups. Ensure correct assembly to the BSPT tapered thread and verify compatibility with the hose and gun to maintain sealing and longevity under repeated motion. Regular inspection and maintenance will further extend service life.

Does the Rotary end with GZ BSPT without flange, stainless steel, type AK require special maintenance when used at 40 bar in washing-hose water-guns?

No special maintenance beyond normal good-practice is required for the Rotary end with GZ BSPT without flange, stainless steel, type AK when used at 40 bar in washing-hose water-guns, provided it is installed and used as intended. Key points: - Material suitability: Made from AISI 316 stainless steel, it is corrosion-resistant and appropriate for typical washing-water environments. - Pressure rating: Rated for working pressure up to 40 bar, so operation at 40 bar is within its specified limits. - Routine checks: Regular visual inspection for wear, thread damage, leaks, or trapped debris is recommended to ensure long-term reliable performance. - Sealing and assembly: Use proper sealing methods for BSPT tapered threads (correct tape/sealant and correct torque). Avoid over-tightening which can damage threads. - Operational factors: If exposed to aggressive chemicals, high temperatures, or significant mechanical shock/vibration, increase inspection frequency and consider protective measures. - Lubrication: No special lubrication is normally required; if used, use compatible, water-safe lubricants approved for stainless steel and hose assemblies. - Replacement: Replace the rotary end if excessive wear, persistent leakage, or mechanical damage is observed. In summary, standard installation, appropriate thread sealing, and periodic inspections are sufficient for safe operation of the Rotary end with GZ BSPT without flange, stainless steel, type AK at 40 bar in washing-hose water-guns.

Rotary end with GZ BSPT without flange, stainless steel, type AK

All products, Low-pressure water spray guns/

Additional information

Material	SS – stainless steel

Rotary end AK with external BSPT tapered thread without flange. Designed for installation in industrial hoses, particularly in washing hoses at the connection point with the water gun, where rotation of the gun is required due to its operation. Material: AISI 316 steel. Working pressure: up to 40 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
AK-SWIFB10	Rotary end GZ 1/2" BSPT, without flange, for hose 3/8", AISI 316	10	40	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Rotary end AK with external BSPT tapered thread without flange. Designed for installation in industrial hoses, particularly in washing hoses at the connection point with the water gun, where rotation of the gun is required due to its operation. Material: AISI 316 steel. Working pressure: up to 40 bar.