Is the PERROT lever connector plug with spun end for hose, carbon steel, KVS suitable for continuous use at 10 bar and how does performance vary for the 216 mm (8 bar) size?

Yes . the PERROT lever connector plug with spun end for hose, carbon steel, KVS Format is specified for continuous use up to 10 bar for standard sizes; however the 216 mm size is rated up to 8 bar. Practically this means you can operate other sizes of this model at system pressures up to 10 bar without exceeding the manufacturerâs working pressure, while the 216 mm unit should not be subjected to pressures above 8 bar. Running the 216 mm at or below 8 bar preserves designed sealing, mechanical integrity and service life; exceeding 8 bar risks leakage, accelerated wear or failure. Always verify installation quality, hose compatibility and galvanization condition, and follow PERROTâs installation and inspection recommendations to ensure safe, long-term performance.

Can the PERROT lever connector plug with spun end for hose, carbon steel, KVS be used in agriculture and tunneling at pressures up to 10 bar, and are there special limits for the 216 mm (8 bar) size?

Yes. The PERROT lever connector plug with spun end for hose, carbon steel, KVS Format can be used in agriculture and tunneling - these applications are explicitly listed in the product description. Its working pressure is up to 10 bar generally; however the 216 mm size is limited to a maximum working pressure of 8 bar.

PERROT lever connector plug with spun end for hose, carbon steel, KVS

All products, Lever couplings/

Additional information

Material	CS – steel (cast iron)

Lever connector plug PERROT with a flared end for hose with wide applications, including in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, wastewater treatment plants, sewage discharge, environmental protection. Material: carbon steel, galvanized. Working pressure: up to 10 bar (up to 8 bar for size 216 mm).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
HC-KVS-050-050	KVS plug 50 mm with flared end for 50 mm hose, galvanized steel.	50	10	In stock	Enquiry
HC-KVS-070-070	KVS plug 70 mm with flared end for 70 mm hose, galvanized steel.	70	10	In stock	Enquiry
HC-KVS-089-075	KVS plug 89 mm with flared end for 75 mm hose, galvanized steel.	75	10	In stock	Enquiry
HC-KVS-089-080	KVS plug 89 mm with flared end for 80 mm hose, galvanized steel.	80	10	In stock	Enquiry
HC-KVS-089-090	KVS plug 89 mm with flared end for 90 mm hose, galvanized steel.	90	10	In stock	Enquiry
HC-KVS-108-075	KVS plug 108 mm with flared end for 75 mm hose, galvanized steel.	75	10	In stock	Enquiry
HC-KVS-108-100	KVS plug 108 mm with flared end for 100 mm hose, galvanized steel.	100	10	In stock	Enquiry
HC-KVS-108-110	KVS plug 108 mm with flared end for 110 mm hose, galvanized steel.	110	10	In stock	Enquiry
HC-KVS-133-125	KVS plug 133 mm with flared end for 125 mm hose, galvanized steel.	125	10	In stock	Enquiry
HC-KVS-159-150	KVS plug 159 mm with flared end for 150 mm hose, galvanized steel.	150	10	In stock	Enquiry
HC-KVS-216-200	KVS plug 216 mm with flared end for 200 mm hose, galvanized steel.	200	8	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Lever connector plug PERROT with a flared end for hose with wide applications, including in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, wastewater treatment plants, sewage discharge, environmental protection. Material: carbon steel, galvanized. Working pressure: up to 10 bar (up to 8 bar for size 216 mm).