Is the Coolant connection with GZ NPT, 3/8" system, JETON compatible with 1/4" coolant lines and rated for up to 3 bar at +65Â°C?

Yes. The Coolant connection with GZ NPT, 3/8" system, JETON is compatible with 1/4" coolant lines and is rated for operation up to 3 bar at +65Â°C. The product description specifies NPT 3/8" or 1/2" external thread connection for coolant (1/4" system), material acetal, working pressure up to 3 bar, and operating temperature up to +65Â°C, which confirms compatibility and the stated ratings.

Does the Coolant connection with GZ NPT, 3/8" system, JETON fit 1/4" coolant lines and withstand 3 bar at +65Â°C?

Yes. The Coolant connection with GZ NPT, 3/8" system, JETON is specified for NPT 3/8" (or 1/2") external thread connection for coolant and is for a 1/4" system. Made of acetal, it is rated for working pressure up to 3 bar and operating temperature up to +65Â°C, so it will fit 1/4" coolant lines and withstand 3 bar at +65Â°C.

Can the Coolant connection with GZ NPT, 3/8" system, JETON be used on 1/4" coolant lines at 3 bar and +65Â°C?

Yes. the Coolant connection with GZ NPT, 3/8" system, JETON can be used on 1/4" coolant lines at 3 bar and +65Â°C. Reasoning: - The product description states it is an NPT 3/8" or 1/2" external thread connection intended for a 1/4" system, so it is specifically designed to interface with 1/4" coolant lines. - Material is acetal, which typically supports the stated operating conditions. - Working pressure is specified up to 3 bar and operating temperature up to +65Â°C. both match your conditions exactly. Precautions: - Ensure proper thread sealing (appropriate tape or sealant for NPT) and correct assembly torque to avoid leaks. - Verify chemical compatibility of acetal with your coolant fluid and any additives at +65Â°C. - Inspect for mechanical stresses or vibration that could affect a plastic (acetal) fitting in your installation.

Coolant connection with GZ NPT, 3/8″ system, JETON

Air and water hoses, All products/

Additional information

Material	P – material (plastic)
Standard length [m]	15

NPT 3/8″ or 1/2″ external thread connection for coolant – 1/4″ system. Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +65°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
JT-83035A	Connection with GZ NPT 3/8" (system 3/8")	-	3	In stock	0 zł		Enquiry
JT-83036A	Connection with GZ NPT 1/2" (system 3/8")	-	3	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

NPT 3/8″ or 1/2″ external thread connection for coolant – 1/4″ system. Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +65°C.