Is the BSP female threaded reducer quadrant, cast iron, type 180/34 suitable for operating up to +300Â°C and pressures of 25 bar (â¤120Â°C) / 20 bar (â¤300Â°C)?

Yes. The BSP female threaded reducer quadrant, cast iron, type 180/34 is specified for use in piping connections of industrial installations with an operating temperature up to +300Â°C and working pressures of 25 bar (up to +120Â°C) and 20 bar (up to +300Â°C). Therefore it is suitable for operation at the stated temperatures and pressures, provided installation and service conditions match the productâs specifications and applicable standards.

Can the BSP female threaded reducer quadrant, cast iron, type 180/34 handle thermal expansion at temperatures up to +300Â°C?

Yes. The BSP female threaded reducer quadrant, cast iron, type 180/34 can accommodate thermal expansion at temperatures up to +300Â°C within its specified limits. It is made of ductile iron and rated for operation up to +300Â°C with a maximum working pressure of 20 bar at that temperature. However, thermal expansion effects depend on the overall piping layout, material compatibility, joint flexibility and anchoring. To ensure safe performance at +300Â°C you should verify that connected materials and seals tolerate the temperature, provide appropriate expansion loops or joints, avoid rigid restraints, and follow applicable engineering standards.

Does BSP female threaded reducer quadrant, cast iron, type 180/34 require special gaskets for sealing at up to +300Â°C?

Yes. at temperatures up to +300Â°C a BSP female threaded reducer quadrant, cast iron, type 180/34 will generally require special highâtemperature gaskets or sealing methods. Why: Standard elastomeric sealants (e.g., NBR, EPDM) and common PTFE tapes lose integrity well below +300Â°C. Even conventional PTFE tape degrades and can creep at very high temperatures and pressures. The componentâs datasheet shows operation to +300Â°C and reduced pressure rating (20 bar) at that temperature, so sealing must be specified for the highâtemperature service to maintain pressure tightness and avoid leakage, embrittlement or chemical attack. Recommended sealing approaches: - Highâtemperature metallic or metalâspiral wound gaskets (e.g., metal/graphite) suitable for threaded joints and rated to +300Â°C. - Graphiteâbased gaskets or flexible graphite sleeves designed for high temperature and pressure. - Highâtemperature anaerobic or specialty sealants rated to +300Â°C where approved for gasketless threaded sealing (verify chemical compatibility and approval). - In some cases, a combination of thin metallic/graphite shim plus highâtemp paste for threads. Precautions: - Choose seal materials compatible with the media and service temperature/pressure (20 bar at +300Â°C). - Confirm compressibility and sealing method suitable for BSP female threaded joints (threaded connections have limited gasket compression). - Follow manufacturer recommendations and applicable codes/standards; consider pressure testing after assembly. - For safety and longevity, consult the reducerâs manufacturer or a piping engineer to specify the exact gasket/sealant material and installation torque. Conclusion: Do not rely on standard lowâtemp sealants. Use gaskets or sealing systems rated for +300Â°C and compatible with the media and pressure for BSP female threaded reducer quadrant, cast iron, type 180/34.

BSP female threaded reducer quadrant, cast iron, type 180/34

Additional information

Material	CS – steel (cast iron)

Reducing tee with internal BSP thread for use in piping connections of industrial installations. Material: ductile iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
EE-18034-12-08-12-08	Four-way fitting with GW BSP 3/4" x 1/2" x 3/4" x 1/2", galvanized cast iron.	-	25	In stock	Enquiry
EE-18034-16-08-16-08	Four-way fitting with GW BSP 1" x 1/2" x 1" x 1/2", galvanized cast iron.	-	25	In stock	Enquiry
EE-18034-16-12-16-12	Four-way fitting with GW BSP 1" x 3/4" x 1" x 3/4", galvanized cast iron.	-	25	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Reducing tee with internal BSP thread for use in piping connections of industrial installations. Material: ductile iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).