Is the Pressure washer gun with extension lance, GW outlet M22x1.5, SG25 suitable for both hot and cold water up to 160Â°C?

Yes. The Pressure washer gun with extension lance, GW outlet M22x1.5, SG25 is specified as suitable for both hot and cold water and has an operating temperature rating up to +160Â°C. It supports working pressures up to 220 bar (maximum 250 bar) and a flow rate of 30 l/min. The outlet uses an internal thread M22x1.5 and the gun is available with fixed or rotating installation connections.

Can the Pressure washer gun with extension lance, GW outlet M22x1.5, SG25 handle continuous operation at 220 bar without overheating?

Pressure washer gun with extension lance, GW outlet M22x1.5, SG25: According to the provided specifications, this gun is rated for a working pressure up to 220 bar, max 250 bar, flow 30 l/min and operating temperature up to +160Â°C. Mechanically it is therefore designed to handle 220 bar. However, continuous operation without overheating depends on system factors not specified (pump duty cycle, water temperature, duty-cycle rating of internal seals, cooling from flow, and ambient conditions). If installed in a properly sized industrial system with continuous water flow at rated temperature and pressure, it should operate continuously at 220 bar. For guaranteed continuous-duty use, confirm with the manufacturer about duty-cycle limits, seal materials suitability for your fluid/temperature and any required maintenance intervals.

Does the Pressure washer gun with extension lance, GW outlet M22x1.5, SG25 require special maintenance for high-temperature use?

Pressure washer gun with extension lance, GW outlet M22x1.5, SG25: No special maintenance is required beyond standard care, provided the gun is used within its specified limits (operating temperature up to +160Â°C and working pressure up to 220 bar). Recommended maintenance practices for reliable high-temperature use: - Inspect seals, O-rings and threaded M22x1.5 connections regularly for wear, hardening or leaks; high temperatures accelerate seal agingâreplace any degraded seals with compatible high-temperature parts. - Rinse and flush the gun and lance after use to remove detergents, scale or deposits that can concentrate under heat and cause internal wear or blockage. - Lubricate any moving parts or rotating connection points with a lubricant rated for high temperatures to prevent sticking and reduce wear. - Check the plastic housing periodically for cracks or deformation caused by prolonged heat exposure; replace the gun if damage is found. - Avoid dry firing (operating without adequate water flow) and prevent abrupt thermal shocks (e.g., spraying cold water onto a hot lance) to reduce stress on materials and seals. - Follow manufacturer guidelines for replacement intervals of consumables and use spare parts specified for SG25. Adhering to these routine checks and using temperature-compatible replacement parts will ensure safe, long-lasting performance of the Pressure washer gun with extension lance, GW outlet M22x1.5, SG25 at high temperatures.

Gun for washer pressure with lance extension, outlet M22x1.5 female, SG25

All products, Guns for high-pressure washers/

Additional information

High-pressure Water gun SG25 with lance extension for applications industrial. Suitable for warm and cold water. The lever mechanism does not require the operator to use much force, which translates into comfortable and pleasant work. part outlet terminated a thread internal M22x1.5. Gun occurs in version of fixed or swivel connection for installations. Housing material: high-strength plastic. Working pressure: up to 220 bar. pressure The permissible: 250 bar. Flow rate: 30 l/min. Operating temperature: up to +160°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
MH-1030090123	Gun for water SG25 with an extension lance with an outlet M22x1.5 female, inlet 3/8" BSP female	-	220	In stock	0 zł		Enquiry
MH-1030090223	Gun for water SG25 with an extension lance with an outlet M22x1.5 female, inlet 3/8" BSP female swivel	-	220	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

High-pressure Water gun SG25 with lance extension for applications industrial. Suitable for warm and cold water. The lever mechanism does not require the operator to use much force, which translates into comfortable and pleasant work. part outlet terminated a thread internal M22x1.5. Gun occurs in version of fixed or swivel connection for installations. Housing material: high-strength plastic. Working pressure: up to 220 bar. pressure The permissible: 250 bar. Flow rate: 30 l/min. Operating temperature: up to +160°C.