Is the Extension lance 375 mm, for high-pressure cleaner gun, galvanized steel rated for continuous use at 250 bar and 160Â°C?

Yes. Extension lance 375 mm, for high-pressure cleaner gun, galvanized steel is rated for continuous use at up to 250 bar and an operating temperature up to +160Â°C. The spec lists working pressure up to 250 bar (maximum 280 bar) and operating temperature up to +160Â°C, with connections GZ 1/4" BSP and GW M22x1.5, flow rate 45 l/min, material galvanized steel.

Can the Extension lance 375 mm, for high-pressure cleaner gun, galvanized steel be used with M22x1.5 threaded accessories at 250 bar?

Yes. The Extension lance 375 mm, for high-pressure cleaner gun, galvanized steel can be used with M22x1.5 threaded accessories at 250 bar because its outlet connection is GW M22x1.5 and its working pressure rating is up to 250 bar (maximum 280 bar). Ensure the mating accessory also supports the pressure, flow rate (45 l/min) and temperature (up to +160Â°C), and that seals and threads are in good condition for safe operation.

Can the Extension lance 375 mm, for high-pressure cleaner gun, galvanized steel withstand occasional pressure spikes up to 280 bar?

Yes. the Extension lance 375 mm, for high-pressure cleaner gun, galvanized steel can withstand occasional pressure spikes up to 280 bar, but with important caveats. Why: the lanceâs rated working pressure is up to 250 bar and its maximum pressure is specified as 280 bar. That means normal operation should be kept at or below 250 bar; the construction and materials (galvanized steel, specified connections GZ 1/4" BSP and GW M22x1.5) are designed to tolerate pressures up to the stated maximum of 280 bar. Caveats and recommendations: - Occasional spikes only: 280 bar is the maximum limit. Repeated or prolonged exposure at or above 280 bar can cause accelerated wear, fatigue, or failure. - Safety margin: operating continuously close to the maximum reduces the safety margin and service life. Aim to keep normal operating pressure at or below the 250 bar working pressure. - Check accessories: ensure the connected gun, fittings, seals, and hoses are also rated for these pressures and temperatures (up to +160Â°C, 45 l/min). - Inspect regularly: perform periodic inspections for damage, corrosion, or leaks after any spike event. - Follow manufacturer guidance: adhere to recommended maintenance and safety practices. Bottom line: Occasional spikes up to 280 bar are within the lanceâs maximum specification, but avoid routine operation at that level and ensure the whole system and inspection practices support safe use.

Extension lance 375 mm, for high-pressure cleaner gun, galvanized steel

All products, Guns for high-pressure washers/

Additional information

Thermal insulated extension lance, designed for high-pressure washer. Length: 375 mm. Connections: (inlet) GZ 1/4″ BSP / (outlet) GW M22x1.5. Working pressure: up to 250 bar. Maximum pressure: 280 bar. Flow rate: 45 l/min. Operating temperature: up to +160°C. Material: galvanized steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
MH-1020260100	Extension lance 375 mm, outlet GW M22x1.5, galvanized carbon steel.	-	250	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Thermal insulated extension lance, designed for high-pressure washer. Length: 375 mm. Connections: (inlet) GZ 1/4″ BSP / (outlet) GW M22x1.5. Working pressure: up to 250 bar. Maximum pressure: 280 bar. Flow rate: 45 l/min. Operating temperature: up to +160°C. Material: galvanized steel.