Can the Precision compressed air reducing valve with BSP female thread, GS series maintain stable outlet pressure with supply up to 10 bar and non-oiled 10 Âµm filtered air?

Yes. The Precision compressed air reducing valve with BSP female thread, GS series is designed to maintain a set outlet pressure stably while quickly venting excess pressure. It supports supply pressures up to 10 bar and is specified for filtered (10 Âµm), nonâoiled compressed air. The product features two identical opposing regulating valves (separate for supply and outlet) to ensure high setting precision and high flow during aeration and venting, plus a drain valve sensitivity of 30 mbar for fine control. Available output ranges (0â2, 0â4, 0â8 bar) fall within the stated supply capability, and flow ratings (1200 l/min for 1/8", 1380 l/min for 1/4" at 6 bar input, Îp=1 bar) indicate adequate capacity for many applications. Operating temperature is â10Â°C to +50Â°C. Based on the specification, the valve can maintain stable outlet pressure with up to 10 bar supply and nonâoiled 10 Âµm filtered air, provided the chosen outlet range and flow requirements match your system demands.

Does the Precision compressed air reducing valve with BSP female thread, GS series require mounting brackets or can it be direct-mounted?

Precision compressed air reducing valve with BSP female thread, GS series can be either mounted using mounting brackets or directly mounted. The valve body includes mounting holes for direct installation in the system, while mounting brackets are also provided as an alternative for flexible mounting options.

Precision compressed air reducing valve with BSP female thread, GS series

Air preparation elements (FRL), All products/

Additional information

Maximum operating temperature [°C]	50
Minimum operating temperature [°C]	-10
Standard length [m]	4, 7.5

Precision pressure reducing valve series GS with quick venting, designed to maintain a set pressure at a constant level and to quickly discharge any excess pressure from the pneumatic system. Intended for applications requiring high accuracy, e.g., for use with actuators with a reduced friction coefficient typically used as pneumatic springs with a constant characteristic. High flow through the valve during aeration and venting of the system and high setting precision are ensured by two identical and opposing regulating valves, separate for the supply and outlet connections. Installation in the system is done using mounting brackets or directly, using mounting holes located in the valve body. Output pressure range: 0÷2, 0÷4, 0÷8 bar. Supply pressure: up to 10 bar. Working medium: filtered 10 µm compressed air, non-oiled. Drain valve sensitivity: 30 mbar. Operating temperature: from -10°C to +50°C. Connection: BSP 1/8″ and 1/4″. Additional connection for pressure gauge: BSP 1/8″. Flow: 1200 l/min – 1/8″, 1380 l/min – 1/4″ (at input pressure 6 bar Δp = 1 bar).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-5511200	Precision pressure reducing valve REG GS 1/8 02	-	-	In stock	Enquiry
MW-5511300	Precision pressure reducing valve REG GS 1/8 04	-	-	In stock	Enquiry
MW-5511400	Precision pressure reducing valve REG GS 1/8 08	-	-	In stock	Enquiry
MW-5512200	Precision pressure reducing valve REG GS 1/4 02	-	-	In stock	Enquiry
MW-5512300	Precision pressure reducing valve REG GS 1/4 04	-	-	In stock	Enquiry
MW-5512400	Precision pressure reducing valve REG GS 1/4-08	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Precision pressure reducing valve series GS with quick venting, designed to maintain a set pressure at a constant level and to quickly discharge any excess pressure from the pneumatic system. Intended for applications requiring high accuracy, e.g., for use with actuators with a reduced friction coefficient typically used as pneumatic springs with a constant characteristic. High flow through the valve during aeration and venting of the system and high setting precision are ensured by two identical and opposing regulating valves, separate for the supply and outlet connections. Installation in the system is done using mounting brackets or directly, using mounting holes located in the valve body. Output pressure range: 0÷2, 0÷4, 0÷8 bar. Supply pressure: up to 10 bar. Working medium: filtered 10 µm compressed air, non-oiled. Drain valve sensitivity: 30 mbar. Operating temperature: from -10°C to +50°C. Connection: BSP 1/8″ and 1/4″. Additional connection for pressure gauge: BSP 1/8″. Flow: 1200 l/min – 1/8″, 1380 l/min – 1/4″ (at input pressure 6 bar Δp = 1 bar).