Is the Quick connector DN10 without valve, with male thread BSP, stainless steel, series 27KA compatible with potable water and food-grade applications?

Quick connector DN10 without valve, with male thread BSP, stainless steel, series 27KA is suitable for potable water and many food-grade applications but with limitations. Powody: - MateriaÅ korpusu: AISI 316Ti . high-grade stainless steel commonly accepted for food and potable water use (good corrosion resistance, suitable for contact with water and many food products). - Uszczelnienie: FKM (fluoroelastomer) . good chemical and temperature resistance, but not universally approved for all food-contact applications; some food regulations prefer EPDM, NBR or FDAâcompliant elastomers. Vending/food applications may require specific FDA/EC approvals or food-grade elastomer certification. - Temperaturowy zakres: -15Â°C do +200Â°C . adequate for most potable water and food processes. - Przeznaczenie wg opisu: medium includes water . producent przewiduje zastosowanie z wodÄ. Wnioski i zalecenia: - Technicznie komponent jest kompatybilny z wodÄ i moÅ¼e byÄ uÅ¼yty w aplikacjach zwiÄzanych z Å¼ywnoÅciÄ, ale przed zastosowaniem w kontakcie z Å¼ywnoÅciÄ lub wodÄ pitnÄ naleÅ¼y: - zweryfikowaÄ certyfikaty materiaÅÃ³w (czy AISI 316Ti i uÅ¼yte FKM majÄ wymagane dopuszczenia: np. FDA, EU 10/2011, WRAS/ACS/NSF dla wody pitnej), - rozwaÅ¼yÄ koniecznoÅÄ zastosowania uszczelnieÅ o udokumentowanej zgodnoÅci z Å¼ywnoÅciÄ (jeÅli obecne FKM nie posiada odpowiednich atestÃ³w), - skonsultowaÄ siÄ z dostawcÄ/producentem w celu potwierdzenia zgodnoÅci z lokalnymi regulacjami dla wody pitnej i aplikacji spoÅ¼ywczych. Podsumowanie: Quick connector DN10 without valve, with male thread BSP, stainless steel, series 27KA is materially suitable for water and many food-related uses, but final akceptacja wymaga potwierdzenia stosownych certyfikatÃ³w uszczelnienia i dokumentÃ³w zgodnoÅci.

Can Quick connector DN10 without valve, with male thread BSP, stainless steel, series 27KA be used with lubricants or oil-based fluids?

No. Quick connector DN10 without valve, with male thread BSP, stainless steel, series 27KA is specified for compressed air, inert gases and water. Sealing is FKM (Viton), which is compatible with many oils, but the productâs media list and working conditions (rated for those fluids only) do not guarantee suitability for lubricants or oil-based fluids. For use with oils you must confirm chemical compatibility of FKM and AISI 316Ti with the specific lubricant, check seal swelling/softening and temperature limits (-15Â°C to +200Â°C), and verify manufacturer approval for oil service. Without explicit manufacturer confirmation, do not use it with lubricants or oil-based fluids.

Quick connector DN10 without valve, with male thread BSP, stainless steel, series 27KA

All products, General-purpose low-pressure quick couplings/

Additional information

Material	SS – stainless steel

Quick coupling plug, one-sided shut-off, series 27KA DN 10 with external BSP thread. Medium: compressed air, inert gases, water. Working pressure: 35 bar. Material: AISI 316Ti steel. Sealing: FKM. Operating temperature: from -15°C to +200°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
RE-27SFAW21EXX	Quick coupling plug 27SF DN10, GZ 1/2" BSP, AISI 316	-	35	In stock	0 zł		Enquiry
RE-27SFAW26EXX	Quick coupling plug 27SF DN10, GZ 3/4" BSP, AISI 316	-	35	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Quick coupling plug, one-sided shut-off, series 27KA DN 10 with external BSP thread. Medium: compressed air, inert gases, water. Working pressure: 35 bar. Material: AISI 316Ti steel. Sealing: FKM. Operating temperature: from -15°C to +200°C.