Is the Quick connect plug with GW (3/16" Ã· 1"), with valve, AISI 303 steel, PERFECTING suitable for gas service and compatible with ISO-B quick couplings from other manufacturers?

Quick connect plug with GW (3/16" Ã· 1"), with valve, AISI 303 steel, PERFECTING is suitable for gas service and compatible with ISO-B quick couplings from other manufacturers. According to the product description, it is ideally suited for gas media and applicable to gases among other fluids. It is interchangeable with ISO-B quick couplings from other manufacturers. Operating limits: working pressure up to 240 bar (size-dependent) with a 4:1 safety factor; material AISI 303 steel; NBR sealing suitable from -40Â°C to +121Â°C. Always verify specific size, pressure rating and seal compatibility for your gas type and system before use.

Can the Quick connect plug with GW (3/16" Ã· 1"), with valve, AISI 303 steel, PERFECTING be used for steam and chemical applications?

Quick connect plug with GW (3/16" Ã· 1"), with valve, AISI 303 steel, PERFECTING can be used for steam and many chemical applications, but with important limits. The product description lists suitability for industrial media including steam and chemicals, AISI 303 construction, working pressure up to 240 bar (size-dependent) and NBR seals (operating range â40Â°C to +121Â°C). NBR, however, has limited chemical resistance (poor with many solvents, ketones, acids and high-temperature steam long-term) and the maximum seal temperature is +121Â°C. For safe use with steam or aggressive chemicals verify operating temperature, chemical compatibility with NBR and AISI 303, required pressure and service duration. If conditions approach NBR or AISI 303 limits, choose a different seal material or higher-grade stainless steel.

Can the Quick connect plug with GW (3/16" Ã· 1"), with valve, AISI 303 steel, PERFECTING be used with compressed gases?

Yes. The Quick connect plug with GW (3/16" Ã· 1"), with valve, AISI 303 steel, PERFECTING can be used with compressed gases. The product description explicitly states it is "ideally suited for gas media" and lists gases among its industrial applications. Material (AISI 303) and NBR sealing (operating range â40Â°C to +121Â°C) are compatible with many compressed gases. Working pressure is rated up to 240 bar (size-dependent) with a 4:1 safety factor. suitable for typical compressed gas systems within that pressure limit. Important considerations: - Verify the specific coupling size and its maximum working pressure against your gas system pressure. - Confirm NBR compatibility with the particular gas (NBR resists many gases but can swell with certain chemicals). - For oxygen service or other reactive gases, follow special material and cleaning requirements (NBR and standard stainless may not be suitable without oxygen cleaning and approvals). If you provide the gas type, operating pressure and temperature, I can confirm suitability or flag any special precautions.

Quick connect plug with GW (3/16″ ÷ 1″), with valve, AISI 303 steel, PERFECTING

All products, Hydraulic quick couplings/

Additional information

Material	SS – stainless steel
Standard length [m]	2

Quick coupling plug with internal BSP or NPT thread (3/16″ ÷ 1″), with valve, ideally suited for gas media. Interchangeable with ISO-B quick couplings from other manufacturers. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases, chemicals). Working pressure: up to 240 bar (depending on the size of the quick coupling), (safety factor 4:1). Material: AISI 303 steel. Sealing: NBR (from -40°C to +121°C).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
PC-H1F1-S	Plug with 1/8" NPT thread, with valve, AISI 303	-	240	In stock	Enquiry
PC-H2BF2-S	Plug with 1/4" BSP thread, with valve, AISI 303	-	240	In stock	Enquiry
PC-H2F2-S	Plug with GW 1/4" NPT, with valve, AISI 303	-	240	In stock	Enquiry
PC-H3BF3-S	Plug with 3/8" BSP thread, with valve, AISI 303	-	240	In stock	Enquiry
PC-H3F3-S	3/8" NPT male connector with valve, AISI 303	-	240	In stock	Enquiry
PC-H4BF4-S	Plug with 1/2" BSP thread, with valve, AISI 303	-	240	In stock	Enquiry
PC-H4F4-S	Plug with 1/2" NPT thread, with valve, AISI 303	-	240	In stock	Enquiry
PC-H6BF6-S	Plug with 3/4" BSP thread, with valve, AISI 303	-	200	In stock	Enquiry
PC-H6F6-S	3/4" NPT plug with valve, AISI 303	-	200	In stock	Enquiry
PC-H8BF8-S	1" BSP plug with valve, AISI 303	-	138	In stock	Enquiry
PC-H8F8-S	1" NPT plug with valve, AISI 303	-	138	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Quick coupling plug with internal BSP or NPT thread (3/16″ ÷ 1″), with valve, ideally suited for gas media. Interchangeable with ISO-B quick couplings from other manufacturers. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases, chemicals). Working pressure: up to 240 bar (depending on the size of the quick coupling), (safety factor 4:1). Material: AISI 303 steel. Sealing: NBR (from -40°C to +121°C).