Can the Reducing valve for compressed air with REG locking, without end plates, SKILLAIRÂ® series maintain output pressure stability at varying flow rates for sizes 100, 200, 300?

Yes. The Reducing valve for compressed air with REG locking, without end plates, SKILLAIRÂ® series can maintain output pressure stability across varying flow rates for sizes 100, 200 and 300 within their specified operating ranges, provided system conditions are respected: - Each size is rated for a specific maximum flow: 1600 l/min (size 100), 3500 l/min (size 200), 7000 l/min (size 300). these flows are given at input pressure 6 bar with Îp = 1 bar. Staying at or below these flow capacities helps preserve stable outlet pressure. - Output pressure selectable ranges (0â2, 0â4, 0â8, 0â12 bar) and maximum supply pressure (up to 15 bar; up to 13 bar for sizes 200 and 300) define the allowable operating window. For stable regulation, maintain supply pressure above the set outlet pressure plus the valveâs required pressure differential. - Operating temperature up to +50Â°C and correct connections (BSP 1/4"â1", pressure gauge BSP 1/8") should be observed to avoid performance degradation. In practice, for best stability under varying flow demand, ensure adequate supply pressure margin, avoid exceeding the stated flow capacities, and use proper installation and sizing. Within these constraints, the Reducing valve for compressed air with REG locking, without end plates, SKILLAIRÂ® series will provide stable outlet pressure for sizes 100, 200 and 300.

Reducing valve for compressed air with REG locking, without end plates, SKILLAIR® series

Air preparation elements (FRL), All products/

Additional information

Maximum operating temperature [°C]	50

REG pressure reducing valve, SKILLAIR® series, without end plates, is used for regulating operating pressure, ensuring proper device operation. Size: 100, 200, 300. Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar (13 bar – size 200, 300). Operating temperature: up to +50°C. Connection: BSP 1/4″ to 1″. Pressure gauge connection: BSP 1/8″. Flow rate: 1600 l/min – series 100, 3500 l/min – series 200, 7000 l/min – series 300 (at input pressure 6 bar Δp = 1 bar).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-3210001A	REG 100 02 pressure reducing valve with lock (SKILLAIR) without end plates.	-	-	In stock	Enquiry
MW-3210002A	REG 100 04 pressure reducing valve with lock (SKILLAIR) without end plates.	-	-	In stock	Enquiry
MW-3210003A	REG 100 08 pressure reducing valve with lock (SKILLAIR) without end plates.	-	-	In stock	Enquiry
MW-3210004A	REG 100 012 pressure reducing valve with lock (SKILLAIR) without end plates.	-	-	In stock	Enquiry
MW-3410003A	REG 200 08 pressure reducing valve with lock (SKILLAIR) without end plates.	-	-	In stock	Enquiry
MW-3410004A	REG 200 012 pressure reducing valve with lock (SKILLAIR) without end plates.	-	-	In stock	Enquiry
MW-4410000A	REG 300 02 pressure reducing valve with lock (SKILLAIR) without end plates.	-	-	In stock	Enquiry
MW-4410002A	REG 300 08 pressure reducing valve with lock (SKILLAIR) without end plates.	-	-	In stock	Enquiry
MW-4410003A	REG 300 012 pressure reducing valve with lock (SKILLAIR) without end plates.	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

REG pressure reducing valve, SKILLAIR® series, without end plates, is used for regulating operating pressure, ensuring proper device operation. Size: 100, 200, 300. Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar (13 bar – size 200, 300). Operating temperature: up to +50°C. Connection: BSP 1/4″ to 1″. Pressure gauge connection: BSP 1/8″. Flow rate: 1600 l/min – series 100, 3500 l/min – series 200, 7000 l/min – series 300 (at input pressure 6 bar Δp = 1 bar).