Does the Non-freezing pressure washer gun with GW 1/4" BSP outlet, SG25, require special maintenance to ensure non-freezing performance at low temperatures?

Non-freezing pressure washer gun with GW 1/4" BSP outlet, SG25 does not state any special maintenance procedures in the provided description. Its design for non-freezing use and robust high-strength plastic housing imply it is built to resist freezing under intended low-temperature operation. However, to ensure reliable non-freezing performance in practice, follow basic precautions: - Drain and dry the gun and connected hoses after use to remove standing water that could freeze. - Store the gun in a frost-free environment when not in use, or keep it connected to a heated/insulated line. - Use antifreeze-compatible fluids if system specifications and application permit. Avoid fluids that may damage seals or components. - Inspect seals, O-rings and connections regularly for wear or damage; replace any compromised parts to prevent leaks and water retention. - Operate within the specified temperature and pressure limits (operating temperature up to +160Â°C; working pressure up to 220 bar). - If long idle periods in freezing conditions are expected, follow standard winterization: flush with an appropriate antifreeze solution and cycle the trigger to ensure passages are filled. These routine steps will help maintain the Non-freezing pressure washer gun with GW 1/4" BSP outlet, SG25 performance at low temperatures despite no special maintenance being specified.

Can the Non-freezing pressure washer gun with GW 1/4" BSP outlet, SG25 be used safely with potable hot water up to 160Â°C?

Yes - the Non-freezing pressure washer gun with GW 1/4" BSP outlet, SG25 is specified for use with hot and cold water and has an operating temperature up to +160Â°C, so it can be used with potable hot water up to 160Â°C. Ensure the entire system (hoses, seals, fittings) and potable-water compatibility are certified for hot potable water at that temperature, and follow local regulations for materials in contact with drinking water.

Is the Non-freezing pressure washer gun with GW 1/4" BSP outlet, SG25 compatible with common industrial lance fittings?

Yes. The Non-freezing pressure washer gun with GW 1/4" BSP outlet, SG25 uses a 1/4" BSP internal (female) thread at the outlet, which is a standard British Standard Pipe thread commonly found on many industrial lance fittings and accessories. That makes it compatible with lances, extensions, nozzles and couplings that have a matching 1/4" BSP external (male) thread. A few practical notes to ensure proper fit and safe operation: - Verify the lance/fitting is specified as 1/4" BSP (not NPT or another thread standard), as different thread types are not directly compatible. - Check pressure and temperature ratings of the mating lance/fitting. the SG25 is rated for working pressure up to 220 bar (max 250 bar) and temperatures up to +160Â°C; the connected lance must meet or exceed those limits. - Confirm whether you need the fixed or rotating-connection version of the SG25 to match your installation and desired hose orientation. - Use appropriate sealing (BSP-compatible thread sealant or tape) and proper torque per manufacturer guidance to avoid leaks and preserve thread integrity. In summary, the Non-freezing pressure washer gun with GW 1/4" BSP outlet, SG25 is compatible with common industrial lance fittings that feature a 1/4" BSP male thread, provided the mating parts meet the same pressure and temperature requirements.

Non-freezing pressure washer gun with GW 1/4″ BSP outlet, SG25

All products, Guns for high-pressure washers/

Additional information

Non-freezing high-pressure water gun SG25 for industrial applications. Suitable for hot and cold water. The lever mechanism does not require the operator to exert significant force, resulting in comfortable and pleasant operation. The outlet part is finished with a 1/4″ BSP internal thread. The gun is available in versions with a fixed or rotating connection to the installation. Housing material: high-strength plastic. Working pressure: up to 220 bar. Maximum pressure: 250 bar. Flow rate: 30 l/min. Operating temperature: up to +160°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
MH-1011050117	Non-freezing water gun SG25, type AF0.6, inlet GW 3/8" BSP	-	220	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Non-freezing high-pressure water gun SG25 for industrial applications. Suitable for hot and cold water. The lever mechanism does not require the operator to exert significant force, resulting in comfortable and pleasant operation. The outlet part is finished with a 1/4″ BSP internal thread. The gun is available in versions with a fixed or rotating connection to the installation. Housing material: high-strength plastic. Working pressure: up to 220 bar. Maximum pressure: 250 bar. Flow rate: 30 l/min. Operating temperature: up to +160°C.