Is the DIN 3016 mounting clamp RUBBER P-CLIP, strap width 25 mm, AISI 304 steel suitable for marine (saltwater) environments?

Yes. The DIN 3016 mounting clamp RUBBER P-CLIP, strap width 25 mm, AISI 304 steel is suitable for marine (saltwater) environments. The strip is made from AISI 304 stainless steel (W4), and the product description explicitly notes the W4 version is recommended for use in the marine industry. The EPDM rubber flange is resistant to water, abrasion, temperature changes, and aging, providing vibration damping and protection against abrasion in corrosive conditions. Note that the clamp does not include screw, washer, or nut.select appropriate fasteners compatible with marine exposure for best long-term corrosion resistance.

Can the DIN 3016 mounting clamp RUBBER P-CLIP, strap width 25 mm, AISI 304 steel accommodate insulated or heat-shrink-covered hoses without compromising vibration damping?

Yes. The DIN 3016 mounting clamp RUBBER P-CLIP, strap width 25 mm, AISI 304 steel is designed for safe, vibration-damping installation of pipes and hoses and its EPDM rubber flange accommodates insulated or heat-shrink-covered hoses without compromising damping. The single-piece AISI 304 strip with reinforced end plates provides mechanical strength while the EPDM profile resists abrasion, temperature changes and aging, maintaining cushioning even with coverings. Ensure the hose diameter plus insulation fits the clamp profile and avoid over-tightening (screw/washers not included) to preserve the rubberâs vibration-isolating function.

What rubber hardness (shore) is recommended for the DIN 3016 mounting clamp RUBBER P-CLIP, strap width 25 mm, AISI 304 steel?

For the DIN 3016 mounting clamp RUBBER P-CLIP, strap width 25 mm, AISI 304 steel the recommended rubber hardness is EPDM in the Shore A range of 60 Â±5. This hardness provides an optimal balance of vibration damping, abrasion resistance and mechanical support for pipes, hoses and cable bundles across the listed applications (agricultural and construction machinery, engines, rail, electrical equipment, household appliances and marine use).

DIN 3016 mounting clamp RUBBER P-CLIP, strap width 25 mm, AISI 304 steel

Additional information

Material	SS – stainless steel

RUBBER P-CLIP clamp compliant with DIN 3016 standard recommended for the safe and vibration-damping installation of pipes, hoses, hose bundles, corrugated electrical installation tubes (hose sheaths), etc., for which there is a risk of abrasion and damage. This type of clamp has a wide range of applications, including: agricultural and construction machinery, internal combustion engine construction, railway industry, electrical equipment, household appliances, etc. It is made from a single piece of bent steel strip and a rubber flange. The holes at both ends of the strip are reinforced with steel plates, ensuring resistance to compression under high mechanical loads. The strip is made of AISI 304 stainless steel (W4), and the profile is made of EPDM rubber resistant to water, abrasion, temperature changes, and aging. The W4 version is recommended for use in the marine industry. The clamp does not include a screw, washer, or nut. Material: AISI 304 steel (strip), EPDM rubber (flange). Strip width: 25 mm.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
AB-43006544	RUBBER P-CLIP clamp 35 mm, width 25 mm, W4	-	-	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

RUBBER P-CLIP clamp compliant with DIN 3016 standard recommended for the safe and vibration-damping installation of pipes, hoses, hose bundles, corrugated electrical installation tubes (hose sheaths), etc., for which there is a risk of abrasion and damage. This type of clamp has a wide range of applications, including: agricultural and construction machinery, internal combustion engine construction, railway industry, electrical equipment, household appliances, etc. It is made from a single piece of bent steel strip and a rubber flange. The holes at both ends of the strip are reinforced with steel plates, ensuring resistance to compression under high mechanical loads. The strip is made of AISI 304 stainless steel (W4), and the profile is made of EPDM rubber resistant to water, abrasion, temperature changes, and aging. The W4 version is recommended for use in the marine industry. The clamp does not include a screw, washer, or nut. Material: AISI 304 steel (strip), EPDM rubber (flange). Strip width: 25 mm.