Is the GOST connector with female thread, aluminum suitable for steam or gas applications?

No . the GOST connector with female thread, aluminum is not suitable for steam or gas applications. The product description explicitly states it is designed for pressure and suction systems for liquid and bulk substances and is not suitable for steam and gas transmission. Additional limiting factors: aluminum construction, NBR sealing (suitable for -10Â°C to +80Â°C), and a working pressure of 10 bar . all appropriate for many liquid/bulk uses but not for steam or gas service.

Can the GOST connector with female thread, aluminum be used at temperatures outside -10Â°C to +80Â°C?

No. The GOST connector with female thread, aluminum is specified for an operating temperature range of -10Â°C to +80Â°C. Using it outside this range is not recommended because the aluminum body, NBR (nitrile) rubber sealing and overall performance-including tightness and pressure resistance at the rated 10 bar-are validated only within that specified range. Outside these limits the NBR seal can harden, swell or lose elasticity (at low or high temperatures), leading to leaks or failure; mechanical properties of the connector may also be compromised. For applications beyond -10Â°C to +80Â°C select a connector and seal materials rated for those temperatures.

Does the GOST connector with female thread, aluminum require special maintenance for NBR seals at 10 bar?

No special maintenance is required for the GOST connector with female thread, aluminum Format regarding the NBR seals under normal use at 10 bar, provided the connector is used within its specified limits. Key points: - Operating conditions: The connector is intended for liquid and bulk substance pressure and suction systems (not for steam or gas). Use only in these media. - Pressure and temperature: Rated for 10 bar and an operating temperature range of -10Â°C to +80Â°C. Staying within these limits preserves NBR seal integrity. - NBR properties: NBR (nitrile rubber) is suitable for many oils, water-based fluids and general-purpose sealing at the specified temperature range. It can degrade with incompatible chemicals, high temperatures, ozone, or abrasive media. - Maintenance recommendations (routine, not special): inspect seals periodically for wear, cuts, hardening or swelling; replace seals if damaged or aged; ensure threads and sealing surfaces are clean and free of debris before assembly; avoid over-tightening which can damage the seal; use compatible fluids only. - Storage and handling: store connectors and spare NBR seals away from direct sunlight, ozone sources and temperatures outside the specified range to prevent premature degradation. If you expect exposure to aggressive chemicals, temperatures outside -10Â°Câ¦+80Â°C, or long-term continuous operation near limits, consult the seal/material compatibility data and consider alternative elastomers or more frequent inspection/replacement intervals.

GOST connector with female thread, aluminum

All products, Symmetrical claw couplings/

Additional information

Material	AL – aluminum

GOST connector with internal thread designed for transmission and handling installations in pressure and suction systems for liquid and bulk substances. Not suitable for steam and gas transmission. The connector has a symmetrical design of the connection part. Material: aluminum. Working pressure: 10 bar. Sealing: NBR rubber. Operating temperature: from -10°C to +80°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
GP-GOST2050050-A	GOST adapter 78 mm with BSP 2" thread, aluminum	-	10	In stock	Enquiry
GP-GOST2050065-A	GOST adapter 78 mm with BSP 2.1/2" thread, aluminum	-	10	In stock	Enquiry
GP-GOST2070050-A	GOST adapter 95 mm with BSP 2" thread, aluminum	-	10	In stock	Enquiry
GP-GOST2070065-A	GOST adapter 95 mm with BSP 2.1/2", aluminum	-	10	In stock	Enquiry
GP-GOST2080075-A	GOST adapter 107 mm with BSP 3" thread, aluminum	-	10	In stock	Enquiry
GP-GOST2110100-A	GOST adapter 143 mm with BSP 4" thread, aluminum	-	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

GOST connector with internal thread designed for transmission and handling installations in pressure and suction systems for liquid and bulk substances. Not suitable for steam and gas transmission. The connector has a symmetrical design of the connection part. Material: aluminum. Working pressure: 10 bar. Sealing: NBR rubber. Operating temperature: from -10°C to +80°C.