Is the GOST connector with male thread, aluminum suitable for use with steam or gaseous media?

No. The GOST connector with male thread, aluminum is not suitable for use with steam or gaseous media. According to the description, it is intended for transmission and handling in pressure and suction systems for liquid and bulk substances and is explicitly stated as not suitable for the transmission of steam and gases. Additionally, its construction (aluminum body, NBR rubber sealing, operating temperature -10Â°C to +80Â°C, working pressure 10 bar) further indicates it is designed for liquid/bulk media rather than steam or gases.

Can the GOST connector with male thread, aluminum be used at temperatures below -10Â°C or above +80Â°C?

No. The GOST connector with male thread, aluminum is specified with an operating temperature range from -10Â°C to +80Â°C. Use below -10Â°C or above +80Â°C risks seal failure (NBR rubber), loss of pressure integrity and compromised performance; it is not suitable for steam or gases. If you must operate outside this range, select a connector and sealing material rated for those temperatures.

Does the GOST connector with male thread, aluminum meet compatibility requirements for abrasive or corrosive liquids?

No. The GOST connector with male thread, aluminum is not suitable for abrasive or highly corrosive liquids. Reasons: - Material: aluminum corrodes in contact with many aggressive chemicals (strong acids, alkalis, chlorides) and with abrasive slurries it will wear quickly. - Sealing: NBR rubber (nitrile) resists oils and some chemicals but has limited chemical compatibility. it degrades with many solvents, ketones, strong acids and alkalies, and high abrasion. - Design and usage limits: Rated for liquids and bulk substances at up to 10 bar and â10Â°C to +80Â°C, but explicitly not for steam or gases; abrasive solids suspended in liquids will accelerate mechanical wear and can compromise the seal. If you need handling of abrasive or corrosive liquids, choose connectors made from corrosion-resistant materials (e.g., stainless steel, special alloys or compatible plastics) with seals selected for chemical resistance (e.g., FKM, EPDM, PTFE) and validated for abrasive media.

GOST connector with male thread, aluminum

All products, Symmetrical claw couplings/

Additional information

Material	AL – aluminum

GOST connector with external thread intended for transmission and handling installations in pressure and suction systems for liquid and bulk substances. Not suitable for the transmission of steam and gases. The connector has a symmetrical design of the connection part. Material: aluminum. Working pressure: 10 bar. Sealing: NBR rubber. Operating temperature: from -10°C to +80°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
GP-GOST3050050-A	GOST adapter 78 mm with GZ BSP 2", aluminum	-	10	In stock	Enquiry
GP-GOST3070050-A	GOST adapter 95 mm with GZ BSP 2", aluminum	-	10	In stock	Enquiry
GP-GOST3070065-A	GOST adapter 95 mm with GZ BSP 2.1/2", aluminum	-	10	In stock	Enquiry
GP-GOST3080050-A	GOST adapter 107 mm with GZ BSP 2", aluminum	-	10	In stock	Enquiry
GP-GOST3080065-A	GOST adapter 107 mm with GZ BSP 2.1/2", aluminum	-	10	In stock	Enquiry
GP-GOST3080075-A	GOST adapter 107 mm with GZ BSP 3", aluminum	-	10	In stock	Enquiry
GP-GOST3110100-A	GOST adapter 143 mm with GZ BSP 4", aluminum	-	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

GOST connector with external thread intended for transmission and handling installations in pressure and suction systems for liquid and bulk substances. Not suitable for the transmission of steam and gases. The connector has a symmetrical design of the connection part. Material: aluminum. Working pressure: 10 bar. Sealing: NBR rubber. Operating temperature: from -10°C to +80°C.