Is the Flat wide nozzle for coolant, 1/4" system, LOC-LINEÂ® suitable for continuous use at working pressure up to 3 bar and temperatures up to +76Â°C?

Yes. The Flat wide nozzle for coolant, 1/4" system, LOC-LINEÂ® is specified for working pressures up to 3 bar and operating temperatures up to +76Â°C, so it is suitable for continuous use within those limits. The nozzle is made of acetal, a material commonly used in fluid-handling components for its dimensional stability and chemical resistance at such pressures and temperatures. Ensure the system does not exceed 3 bar or +76Â°C and verify compatibility with the specific coolant used; prolonged exposure to aggressive chemicals or temperatures near the upper limit can reduce service life.

Can the Flat wide nozzle for coolant, 1/4" system, LOC-LINEÂ® be used with fluids incompatible with acetal material?

Flat wide nozzle for coolant, 1/4" system, LOC-LINEÂ® is made of acetal and rated for working pressure up to 3 bar and temperatures up to +76Â°C. If a fluid is chemically incompatible with acetal, DO NOT use this nozzle with that fluid. Acetal (POM) can be attacked or degraded by certain solvents, strong acids, bases, and some fuels; exposure may cause swelling, cracking, loss of strength or seal failure. For incompatible fluids, select a nozzle made from a chemically resistant material (e.g., PTFE, polypropylene, stainless steel) or consult the fluid and material compatibility data before use to ensure safe operation.

Does the Flat wide nozzle for coolant, 1/4" system, LOC-LINEÂ® require special fittings for installation on existing coolant lines?

No. the Flat wide nozzle for coolant, 1/4" system, LOC-LINEÂ® does not require special fittings for installation on existing coolant lines provided those lines are compatible with the LOC-LINEÂ® 1/4" system. The nozzle is designed for the LOC-LINEÂ® modular 1/4" system (material: acetal), so it connects directly to standard LOC-LINEÂ® 1/4" fittings, hoses, and connectors. If your existing coolant lines already use LOC-LINEÂ® 1/4" components, installation is straightforward with push-fit assembly and no additional adapters. However, if your current coolant plumbing uses a different brand, size, or non-modular quick-connect system, you may need a standard adapter or an appropriate fitting to transition from your existing line to the LOC-LINEÂ® 1/4" interface. Also consider working pressure (up to 3 bar) and operating temperature (up to +76Â°C) to ensure compatibility and safe operation.

Flat wide nozzle for coolant, 1/4″ system, LOC-LINE®

Air and water hoses, All products/

Additional information

Wide flat nozzle for LOC-LINE® coolant – 1/4″ system. Available in size 1″. Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +76°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
LL-49427	Flat nozzle with a gap of 24x1.5 mm (1/4" system)	-	3	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Wide flat nozzle for LOC-LINE® coolant – 1/4″ system. Available in size 1″. Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +76°C.