Can ANFOR lever connector socket with GZ BSP, galvanized steel, type A.14 operate reliably at pressures up to 19 bar and temperatures from -20Â°C to +50Â°C?

Yes. The ANFOR lever connector socket with GZ BSP, galvanized steel, type A.14 is specified for a working pressure range from 5 bar up to 19 bar (depending on connector size) and an operating temperature range of â20Â°C to +50Â°C. Its construction (galvanized steel body with NR/SBR rubber sealing) and the stated technical limits indicate it can reliably operate at pressures up to 19 bar and temperatures between â20Â°C and +50Â°C, provided you select the appropriate connector size rated for the maximum pressure and use it within the given temperature range. Always verify the specific connector size rating and inspect for compatibility with your fluid, installation conditions and any applicable safety factors or standards.

Does ANFOR lever connector socket with GZ BSP, galvanized steel, type A.14 suit sewage and groundwater systems in agricultural and construction projects?

Yes. The ANFOR lever connector socket with GZ BSP, galvanized steel, type A.14 is suitable for sewage and groundwater systems in agricultural and construction projects. The product description explicitly lists groundwater drainage, wastewater treatment plants, sewage discharge and environmental protection among its intended uses. Its galvanized steel construction, NR/SBR rubber sealing, and working pressure range (5â19 bar depending on size) plus operating temperature range (â20Â°C to +50Â°C) make it appropriate for typical conditions in such systems. Ensure the chosen connector size meets required pressure and temperature specifications for your specific application.

Is ANFOR lever connector socket with GZ BSP, galvanized steel, type A.14 compatible with NR/SBR sealing for wastewater applications?

Yes. ANFOR lever connector socket with GZ BSP, galvanized steel, type A.14 is compatible with NR/SBR sealing for wastewater applications. The product description explicitly lists NR/SBR rubber as the sealing material and names wastewater treatment plants, sewage discharge, and environmental protection among its intended uses. Galvanized steel body plus NR/SBR sealing supports typical wastewater conditions within the stated operating range: working pressure 5â19 bar (depending on size) and temperature -20Â°C to +50Â°C. Notes to consider before final installation: - Verify chemical compatibility of NR/SBR with specific wastewater constituents (e.g., strong solvents, high concentrations of oils, aggressive chemicals or extreme pH may require alternative elastomers). - Confirm the connector size and corresponding working pressure meet system requirements. - Ensure proper installation and periodic inspection for abrasion, swelling or degradation in your specific operating environment.

ANFOR lever connector socket with GZ BSP, galvanized steel, type A.14

All products, Lever couplings/

Additional information

Material	CS – steel (cast iron)

ANFOR lever connector socket with external BSP thread for use in agricultural operations, horticulture, industry, construction, road and tunnel building, groundwater drainage, wastewater treatment plants, sewage discharge, and environmental protection. Material: galvanized steel. Sealing: NR/SBR rubber. Working pressure: from 5 bar to 19 bar (depending on connector size). Operating temperature: from -20°C to +50°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
OM-A14-060-200	ANFOR socket 60 mm with GZ 2" BSP, galvanized steel.	-	19	In stock	Enquiry
OM-A14-080-250	ANFOR socket 80 mm with GZ 2.1/2" BSP, galvanized steel.	-	16	In stock	Enquiry
OM-A14-080-300	ANFOR socket 80 mm with GZ 3" BSP, galvanized steel.	-	16	In stock	Enquiry
OM-A14-100-400	ANFOR socket 100 mm with GZ 4" BSP, galvanized steel.	-	14	In stock	Enquiry
OM-A14-120-500	ANFOR socket 120 mm with GZ 5" BSP, galvanized steel.	-	13	In stock	Enquiry
OM-A14-150-600	ANFOR socket 150 mm with GZ 6" BSP, galvanized steel.	-	12	In stock	Enquiry
OM-A14-200-800	ANFOR socket 200 mm with GZ 8" BSP, galvanized steel.	-	6	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

ANFOR lever connector socket with external BSP thread for use in agricultural operations, horticulture, industry, construction, road and tunnel building, groundwater drainage, wastewater treatment plants, sewage discharge, and environmental protection. Material: galvanized steel. Sealing: NR/SBR rubber. Working pressure: from 5 bar to 19 bar (depending on connector size). Operating temperature: from -20°C to +50°C.