Is the AGR hydraulic end for UHP hose carbon steel, type PBZ110 compatible with standard BSP threaded fittings and 60Â° cone sealing for thermoplastic UHP hoses?

Yes. The AGR hydraulic end for UHP hose carbon steel, type PBZ110 is compatible with standard external BSP threaded fittings and uses 60Â° cone sealing for thermoplastic UHP hoses. It is specifically designed with an external BSP thread and a 60Â° cone sealing face (AGR), intended for crimping into UHP thermoplastic hoses using an appropriate crimping sleeve. Material is carbon steel, galvanized, matching typical BSP/60Â° cone connection standards.

Can AGR hydraulic end for UHP hose carbon steel, type PBZ110 be used with metric BSP adapters or only BSPP/BSPT standards?

AGR hydraulic end for UHP hose carbon steel, type PBZ110 uses an external BSP thread and seals on a 60Â° cone (AGR). That description indicates it is a cone-sealing design compatible with threads that seal on the cone face, which corresponds to the BSPP (ISO 228) variants that are parallel threads only when paired with a separate cone or Oâring, and to BSPT (BSP tapered, ISO 7) which seals on the thread taper itself. However, the key detail is the 60Â° cone sealing face: this is characteristic of BSPP fittings that use a 60Â° cone insert (commonly called âBSPP coneâ or â60Â° coneâ) or of fittings intended for cone-seat connections (often associated with metric or JIS styles too). Metric BSP adapters is a mixed term: if you mean metric-threaded adapters (ISO metric threads) they do not natively mate with BSPP/BSPT threads nor provide the correct 60Â° cone seat unless specifically machined for that cone. If you mean adapters with BSP thread form but sized in millimetres, that is nonstandard. Therefore, AGR hydraulic end for UHP hose carbon steel, type PBZ110 should be used with adapters that match its external BSP thread form and provide a 60Â° cone sealing face. i.e., the corresponding BSP cone-seat type. It is not suitable to mate directly with generic metric-thread adapters unless those adapters are specifically manufactured to provide the correct BSP thread form and 60Â° cone sealing surface. In practice use BSPP/BSPT-compatible adapters or purpose-made cone-seat adapters to ensure proper sealing.

AGR hydraulic end for UHP hose carbon steel, type PBZ110

Additional information

Material	CS – steel (cast iron)

Hydraulic end (type P – with a special “tail” for thermoplastic hose) with external BSP thread, sealing on a 60° cone (AGR). Designed for crimping in UHP thermoplastic hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-PBZ110-04-025-TO	End. GZ 1/4" BSP, thermoplastic hose 5/32", 60° AGR	4	800	In stock	Enquiry
TI-PBZ110-04-04-TO	End. GZ 1/4" BSP, thermoplastic hose 1/4", 60° AGR	6	800	In stock	Enquiry
TI-PBZ110-06-04-TO	End. GZ 3/8" BSP, thermoplastic hose 1/4", 60° AGR	6	800	In stock	Enquiry
TI-PBZ110-06-06-TO	End. GZ 3/8" BSP, thermoplastic hose 3/8", 60° AGR	10	800	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Hydraulic end (type P – with a special “tail” for thermoplastic hose) with external BSP thread, sealing on a 60° cone (AGR). Designed for crimping in UHP thermoplastic hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.