Can the Five-way diverter block, black galvanized steel, handle 3000 bar continuous pressure or should I use a metal-rubber seal for safety?

Based on the provided description, do not rely on the Five-way diverter block, black galvanized steel for 3000 bar continuous operation. Although the spec lists âWorking pressure: 3000 bar,â it also explicitly states that the maximum working pressure when using a metal-rubber seal is 1000 bar. That contradiction indicates the 3000 bar rating likely applies only with a specific sealing method or under very limited/test conditions. For continuous service and safety you should: - Use a compatible metal-to-metal sealing arrangement if the manufacturer expressly certifies that configuration for 3000 bar continuous duty. Confirm the exact seal type, seat geometry, and installation torque from the manufacturer. - If you must use a metal-rubber (elastomer) seal, limit pressure to â¤1000 bar as specified. - If manufacturer guidance is unclear, assume the conservative limit (1000 bar with elastomer) and contact the supplier/engineer for certified high-pressure configuration and documentation (pressure tests, certificates). - For any high-pressure installation, follow proper hose/pump ratings, use pressure relief devices, and perform leak/pressure testing before service. In short: donât use a metal-rubber seal for 3000 bar.either confirm a metal-metal sealing version certified for 3000 bar or stay at â¤1000 bar for metal-rubber seals.

Is the Five-way diverter block, black galvanized steel compatible with standard 1/4" BSP high-pressure hoses?

Yes. The Five-way diverter block, black galvanized steel uses 5 x 1/4" BSP connections, so it is compatible with standard 1/4" BSP high-pressure hoses. Note: the flow diameter is 5 mm (3/16") and the working pressure rating is up to 3000 bar (with metal-rubber seal max 1000 bar), so ensure your hoses and seals match these dimensions and pressure requirements.

Does the Five-way diverter block, black galvanized steel support mounting a pressure gauge directly to one port?

No. the Five-way diverter block, black galvanized steel does allow the connection of a pressure gauge, but it does not support mounting a pressure gauge directly to one port as an integrated mount. It provides a connection for a pressure gauge (one of the ports can be used for the gauge), but there is no dedicated built-in gauge mounting bracket; the gauge must be attached to one of the 1/4" BSP ports using an appropriate fitting and sealing method compatible with the block (internal cone 120Â°).

Five-way diverter block, black galvanized steel

All products, UHP adapters and accessories/

Additional information

Material	CS – steel (cast iron)

Five-way distribution block allowing the connection of multiple high-pressure hoses to a single pump, as well as the connection of a pressure gauge. Made of black galvanized steel. Flow diameter 5 mm (3/16″). Connections: 5 x 1/4″ BSP. Connection sealing: internal cone 120°. Working pressure: 3000 bar (maximum working pressure when using a metal-rubber seal is 1000 bar).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
CJ-HP-199501683	5x1/4" BSP connection block, 3000 bar	-	2000	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Five-way distribution block allowing the connection of multiple high-pressure hoses to a single pump, as well as the connection of a pressure gauge. Made of black galvanized steel. Flow diameter 5 mm (3/16″). Connections: 5 x 1/4″ BSP. Connection sealing: internal cone 120°. Working pressure: 3000 bar (maximum working pressure when using a metal-rubber seal is 1000 bar).