Is the RB35 water gun with 1/2" BSP rotating connection, polypropylene safe for use with food-contact surfaces and cleaning agents at up to 50Â°C?

Yes . the RB35 water gun with 1/2" BSP rotating connection, polypropylene is suitable for use with food-contact surfaces and cleaning agents up to 50Â°C based on the provided description. Reasoning: - Material: Body is polypropylene (with fiberglass) . a common, food-industry-compatible plastic resistant to many detergents. - Seals and wetted metals: Sealing is Viton (FKM), which offers excellent chemical resistance to a wide range of cleaning agents and high temperatures; valve piston is brass, a typical durable fitting material for sanitary cleaning equipment. - Operating limits: Maximum operating temperature is specified as +50Â°C, matching your temperature requirement; maximum working pressure 12 bar and specified flow rates indicate robust performance for cleaning tasks. - Design features: Protective rings and trigger guard support safe, controlled use on food-contact surfaces. Caveat: For full compliance with specific food-contact regulations (e.g., EU 1935/2004, FDA), and compatibility with particular sanitizers/chemistries, verify certifications and perform supplier confirmation or testing, since the description does not list regulatory approvals or chemical-specific compatibility data.

Can RB35 water gun with 1/2" BSP rotating connection, polypropylene withstand repeated use with hot water and cleaning chemicals up to +50Â°C?

Yes. RB35 water gun with 1/2" BSP rotating connection, polypropylene is designed for food-industry use and its specifications state a maximum operating temperature of +50Â°C, viton seals and brass valve piston-materials compatible with hot water and many cleaning chemicals. The polypropylene (with fiberglass) body and soft rubber protective rings are suitable for repeated use at that temperature. Ensure chemical compatibility with viton and polypropylene for any specific detergents or sanitizers you plan to use; avoid solvents known to attack polypropylene. Operate within the stated limits (max 12 bar pressure, max +50Â°C).

Does the RB35 water gun with 1/2" BSP rotating connection, polypropylene resist corrosion from food-grade detergents?

Yes. The RB35 water gun with 1/2" BSP rotating connection, polypropylene is suitable for use with foodâgrade detergents. Its main body is polypropylene (with fiberglass). a material known for good chemical resistance to many alkaline and neutral cleaners used in food processing. The valve piston is brass and seals are Viton (FKM), both of which are commonly compatible with a wide range of foodâgrade detergents and solvents. Protective soft rubber rings and the overall design (max 12 bar, up to +50Â°C) support typical cleaning conditions in the food industry. Caveats: - Viton is resistant to many detergents but can be attacked by certain strong polar solvents and some highly concentrated acids/alkalis; verify compatibility if you use aggressive or unconventional chemicals. - Brass is generally acceptable for food environments but can corrode with prolonged exposure to highly corrosive agents (strong chlorinated or acidic solutions); if using such chemicals frequently, consider contacting the detergent manufacturer or the RB35 supplier for confirmation. - Stay within the specified maximum temperature (+50Â°C) and pressure (12 bar) to maintain material performance and seal integrity. If you provide the exact detergent formulation or active ingredients, I can give a more specific compatibility assessment.

RB35 water gun with 1/2″ BSP rotating connection, polypropylene

All products, Low-pressure water spray guns/

Additional information

Lightweight, plastic water gun for the food industry. Made of plastic (polypropylene with fiberglass), valve piston – brass, sealing – viton. Equipped with protective rings made of soft rubber. Features smooth flow regulation. The trigger guard protects against uncontrolled water flow and damage. Maximum working pressure: 12 bar. Maximum operating temperature: +50°C. Flow rate: 30 l/min (5 bar), max. 50 l/min.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
PR-RB35	RB35 water gun, swivel connection G 1/2", polypropylene/glass fiber	-	12	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Lightweight, plastic water gun for the food industry. Made of plastic (polypropylene with fiberglass), valve piston – brass, sealing – viton. Equipped with protective rings made of soft rubber. Features smooth flow regulation. The trigger guard protects against uncontrolled water flow and damage. Maximum working pressure: 12 bar. Maximum operating temperature: +50°C. Flow rate: 30 l/min (5 bar), max. 50 l/min.