Is the SMS connector with hose end, bronze suitable for steam or gas applications?

No. The SMS connector with hose end, bronze is not suitable for steam or gas applications. It is designed for transmission and handling installations in pressure and suction systems for liquid and bulk substances only. Specifications . bronze material, working pressure 10 bar, NBR rubber sealing, operating temperature -10Â°C to +80Â°C . further confirm it is not intended for steam or gas transmission.

Can the SMS connector with hose end, bronze be used in systems with temperatures below -10Â°C or above +80Â°C?

No. The SMS connector with hose end, bronze is specified for an operating temperature range from -10Â°C to +80Â°C. It should not be used below -10Â°C or above +80Â°C, as performance and sealing (NBR rubber) are not guaranteed outside that range.

Does the SMS connector with hose end, bronze support abrasive or solid particle handling in bulk substance systems?

Yes. the SMS connector with hose end, bronze can handle abrasive or solid particles in bulk substance systems, but with limitations. Itâs designed for transmission and handling of liquid and bulk substances in pressure and suction systems (not for steam or gases), with a bronze body, NBR sealing, 10 bar working pressure, and operating temperature -10Â°C to +80Â°C. These features make it suitable for many bulk and liquid media that contain solids. However, abrasion from hard particles, particle size and concentration, flow velocity, and cyclic loading can accelerate wearâespecially on the NBR seal and mating surfacesâpotentially reducing lifetime and sealing integrity. For highly abrasive media, large solids, high concentrations, or high-velocity flows, consider verifying compatibility, possible protective measures (harder seal materials, abrasion-resistant coatings, filtration/strainers), and maintenance intervals. If abrasion is severe, a connector specifically rated for abrasive or particulate service is recommended.

SMS connector with hose end, bronze

All products, Symmetrical claw couplings/

Additional information

Material	B – brass (bronze)

SMS connector (Sweden) with hose end is designed for transmission and handling installations in pressure and suction systems for liquid and bulk substances. Not suitable for steam and gas transmission. The connector has a symmetrical design of the connection part. Material: bronze. Working pressure: 10 bar. Sealing: NBR rubber. Operating temperature: from -10°C to +80°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
GP-SMS1032038-B	SMS connector 41 mm with 38 mm hose end, brown	38	10	In stock	Enquiry
GP-SMS1063038-B	SMS connector 76 mm with 38 mm hose end, brown	38	10	In stock	Enquiry
GP-SMS1063052-B	SMS connector 76 mm with hose end 52 mm, brown	50	10	In stock	Enquiry
GP-SMS1063064-B	SMS connector 76 mm with hose end 64 mm, brown	65	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

SMS connector (Sweden) with hose end is designed for transmission and handling installations in pressure and suction systems for liquid and bulk substances. Not suitable for steam and gas transmission. The connector has a symmetrical design of the connection part. Material: bronze. Working pressure: 10 bar. Sealing: NBR rubber. Operating temperature: from -10°C to +80°C.