Is the ANFOR T-piece 1 x socket - 2 x plug, galvanized steel, type A.30M suitable for use at 19 bar working pressure and -20Â°C to +50Â°C?

Yes. The ANFOR T-piece 1 x socket - 2 x plug, galvanized steel, type A.30M is suitable for use at 19 bar working pressure and in the temperature range -20Â°C to +50Â°C. Its specified working pressure is from 5 bar up to 19 bar (depending on coupling size), and its operating temperature range is from -20Â°C to +50Â°C. The construction (galvanized steel body with NR/SBR rubber sealing) supports those conditions. Ensure you confirm the specific coupling size of your unit is rated for the 19 bar end of the range.

Can the ANFOR T-piece 1 x socket - 2 x plug, galvanized steel, type A.30M be used in wastewater treatment plants and groundwater drainage?

Yes. The ANFOR T-piece 1 x socket - 2 x plug, galvanized steel, type A.30M is specified for use in wastewater treatment plants and groundwater drainage. Its galvanized steel construction, NR/SBR rubber sealing, working pressure range (5â19 bar depending on size) and operating temperature (-20Â°C to +50Â°C) make it suitable for those applications. Ensure you select the correct coupling size to meet the required pressure rating and verify compatibility with your specific fluids and site conditions.

Does the ANFOR T-piece 1 x socket - 2 x plug, galvanized steel, type A.30M resist corrosion in coastal or high-salinity environments?

The ANFOR T-piece 1 x socket - 2 x plug, galvanized steel, type A.30M offers basic corrosion protection through its galvanized steel construction. Hot-dip galvanizing provides a zinc coating that resists general atmospheric corrosion and is suitable for many agricultural, industrial and wastewater applications listed in the product description. However, coastal or high-salinity environments (marine atmosphere, salt spray, brackish water) are far more aggressive. In such conditions zinc coatings corrode faster than in inland environments and protective life is reduced. The NR/SBR rubber sealing and the specified working pressures and temperature range do not change the underlying metalâs susceptibility to chloride-induced corrosion. Over time, galvanizing can suffer pitting and undercutting in high-salinity settings, especially where mechanical wear, scratches or persistent wet/dry cycles occur. Conclusion: The ANFOR T-piece 1 x socket - 2 x plug, galvanized steel, type A.30M has some corrosion resistance due to galvanization and is suitable for many wet and industrial uses, but it is not specifically specified as marine-grade or stainless-steel level corrosion-resistant. For long-term use in coastal or high-salinity environments, consider additional protective measures (e.g., stainless steel, duplex coatings, sacrificial anodes, more frequent inspections) or consult the manufacturer for salt-spray/field performance data and recommended service life.

ANFOR T-piece 1 x socket – 2 x plug, galvanized steel, type A.30M

All products, Lever couplings/

Additional information

Material	CS – steel (cast iron)

ANFOR tee 1 x socket – 2 x plug for use in agricultural farms, horticulture, industry, construction, road and tunnel construction, groundwater drainage, wastewater treatment plants, sewage discharge, environmental protection. Material: galvanized steel. Sealing: NR/SBR rubber. Working pressure: from 5 bar to 19 bar (depending on the coupling size). Operating temperature: from -20°C to +50°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
OM-A30M-120	ANFOR tee 120 mm 1 x socket, 2 x plug, galvanized steel.	-	13	In stock	Enquiry
OM-A30M-150	ANFOR tee 150 mm 1 x socket, 2 x plug, galvanized steel.	-	12	In stock	Enquiry
OM-A30M-200	ANFOR tee 200 mm 1 x socket, 2 x plug, galvanized steel.	-	6	In stock	Enquiry
OM-A30M-250	ANFOR tee 250 mm 1 x socket, 2 x plug, galvanized steel.	-	5	In stock	Enquiry
OM-A30M-300	ANFOR tee 300 mm 1 x socket, 2 x plug, galvanized steel.	-	5	In stock	Enquiry
OM-A30M-400	ANFOR tee 400 mm 1 x socket, 2 x plug, galvanized steel.	-	5	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

ANFOR tee 1 x socket – 2 x plug for use in agricultural farms, horticulture, industry, construction, road and tunnel construction, groundwater drainage, wastewater treatment plants, sewage discharge, environmental protection. Material: galvanized steel. Sealing: NR/SBR rubber. Working pressure: from 5 bar to 19 bar (depending on the coupling size). Operating temperature: from -20°C to +50°C.