Can the GA series G two-way manifold module with BSP female threads handle continuous service at 10 bar and +70Â°C without additional cooling or pressure relief?

Short answer: Probably yes . but only if the module is used within the stated limits and system design prevents heat/pressure buildup; otherwise additional measures may be needed. Explanation: The GA series G two-way manifold module with BSP female threads specification lists supply pressure up to 10 bar and operating temperature up to +70Â°C, which indicates the component is rated for those conditions. If your application continuously operates at 10 bar and +70Â°C but does not introduce additional thermal or pressure stresses (e.g., no local heat sources, no prolonged compression heating beyond the rated temperature, no pulsation or pressure spikes above 10 bar), the manifold itself can handle continuous service without extra cooling or pressure relief. Caveats and practical considerations: - Ensure system pressure is controlled and protected (pressure relief valves or regulators upstream) to prevent transient overpressure above 10 bar. - Verify ambient and media temperatures actually do not exceed +70Â°C during operation (including any compression or friction heating). - Continuous operation near maximum ratings can accelerate ageing of seals and materials; plan for more frequent inspection and maintenance. - If airflow or process conditions generate additional heating, pressure pulsations, or potential blockages, add cooling, pressure relief, or safety devices as appropriate. Conclusion: Use the GA series G two-way manifold module with BSP female threads at continuous 10 bar and +70Â°C only if your full system prevents overpressure/overtemperature and you accept the need for closer monitoring and maintenance; otherwise incorporate pressure relief or cooling.

Is the GA series G two-way manifold module with BSP female threads compatible with filtration and regulator setups at 10 bar and +70Â°C?

Yes. The GA series G two-way manifold module with BSP female threads is compatible with filtration and regulator setups rated to 10 bar and +70Â°C. Its specified supply pressure (up to 10 bar) and operating temperature (up to +70Â°C) match those limits, and the internal BSP female threads allow direct connection to standard FRL components. Ensure mating componentsâ thread sizes and pressure/temperature ratings meet or exceed these values and use appropriate seals and assembly practices for safe operation.

Does the GA series G two-way manifold module with BSP female threads support installation in vertical pipelines for air intake at up to 10 bar and +70Â°C?

Yes. The GA series G two-way manifold module with BSP female threads supports installation in vertical pipelines for air intake at up to 10 bar and +70Â°C. The product description specifies it is a two-way branching module with internal BSP thread, used for air intake from any location of the FRL station, with a supply pressure rating up to 10 bar and an operating temperature up to +70Â°Câthese ratings cover the stated pressure and temperature. Ensure correct BSP thread sealing, proper mounting to avoid undue mechanical stress, and compliance with any site-specific installation guidelines or safety regulations for vertical installations.

GA series G two-way manifold module with BSP female threads

Air preparation elements (FRL), All products/

Additional information

Maximum operating temperature [°C]	70

Two-way branching module GA series G with internal BSP thread, used for air intake from any location of the FRL station. Supply pressure: up to 10 bar. Operating temperature: up to +70°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AT-GA200-06	2-way branching module GA200 1/8	-	-	In stock	Enquiry
AT-GA200-08	2-way branching module GA200 1/4"	-	-	In stock	Enquiry
AT-GA300-08	2-way branching module GA300 1/4	-	-	In stock	Enquiry
AT-GA300-10	2-way branching module GA300 3/8	-	-	In stock	Enquiry
AT-GA400-10	2-way branching module GA400 3/8	-	-	In stock	Enquiry
AT-GA400-15	2-way branching module GA400 1/2	-	-	In stock	Enquiry
AT-GA600-20	2-way branching module GA600 3/4"	-	-	In stock	Enquiry
AT-GA600-25	2-way splitter module GA600 1	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Two-way branching module GA series G with internal BSP thread, used for air intake from any location of the FRL station. Supply pressure: up to 10 bar. Operating temperature: up to +70°C.